Recent content by sephknite

Hey all. I've been looking into a bashwich configuration with 2 x 42T 130mm BCD bashguards. My options are: 1. Lekkie Bling Ring 42T 2. Luna Eclipse 42T 3. Luna Eclipse 40T One piece Does anyone who own the Lekkie or Luna Eclipse have any experience or know if a bashguard will fit these 2...

Anyone have experience with adding a bashguard or bashwich onto a Lekkie Bling Ring? I'm curious if that can be done and what parts I'd need to pick up. Thanks.

Oh ok. So chain doesn't necessarily have to be replaced. I also just received the same response from manufacturer 2 minutes ago. One other thing is that when I pedal backwards, my chain doesn't move or rotate backwards. I would need to rotate my rear tire backwards to get the chain to do so.

Hey all. Hello. I have a Bafang BBSHD that came with a 44T chainring. I'm interested in the Lekkie Bling Ring, but it only comes in 42T and 46T. Is there a difference in going for either of those vs. staying with a 44T chainring I currently have? Will the difference be big? Also, if I go with...

Fixed! I took it to my local bike shop, and they tightened the bolt down. Now if only I can get rid of this clicking noise when I pedal and shift gears...

Ah, gotcha. Thanks for the advice and recommendation. As for the one I linked from Amazon, would that work as well? https://www.amazon.com/gp/product/B07FQR1BLG/ref=ox_sc_act_title_1?smid=A1QA3INZ86IJN9&psc=1

I'm assuming it would be the 34.0mm from 27.2mm. Will that .01 from 33.9mm matter?

@Nova Haibike : Sorry if I wasn't clear--I emailed Cirrus Cycles to recommend one of their shims to go along with their BodyFloat, to which they said they didn't have the size. I later found the Zadaro Shim on Amazon, so I'm trying to find out if that will fit before I pull the trigger. But...

Hello. Thanks for the reply. I was guessing/hoping it would work, but just to reiterate-- My bike is this one: https://www.alibaba.com/product-detail/Bafang-48V-1000W-Mid-Motor-20_60759019827.html?spm=a2700.8443308.0.0.40113e5f8SPNjf When I contacted Cirrus Cycles, I was asked if it was for...

Hey all. I'm looking to pick up the Bodyfloat 2.1. I emailed Cirrus Cycles and they tell me that they don't have a shim to 33.9mm (my bike's size). I'm wondering if this shim will work with a 27.2mm Long (420mm) Bodyfloat...

Thanks all. I'll need to pick up a tool to tighten the hex screw that @harryS mentioned, although I had tried this at a bike shop--it didn't help much when I tightened the screw all the way. Correct, the stem is turning at the bottom. If it continues to happen, I'll try to take another video of it.

Adding pictures. Here's a video I just took and posted: Rotating handle bar.

Hello all. I'm experiencing an issue with my ebike where if I stand in front of the bike, hold the front tire between my legs, grab the handle bar, I am able to turn the handle bar left/right. This offsets it so the handlebar is then off-center when I let go. I'm told this is not normal; if...

Thanks all for the suggestions. The manufacturer emailed me back suggesting that I got with aerosol spray paint. I wonder if something like this will work: https://www.homedepot.com/p/Rust-Oleum-Stops-Rust-12-oz-Protective-Enamel-Galaxy-Textured-Metallic-Spray-Paint-6-Pack-252303/202556768 Or...

Hey all, Just received a folding e-bike from China, and despite all the protective foam, it came with 2 scrapes. I'm wondering if anyone can suggest ways to repair this--it has sort of a matte finish, so I'm not sure if spraying black over it will work. Appreciate any suggestions. Thanks!