PedalUma's latest activity
-
PedalUma reacted to Stefan Mikes's post in the thread The Ultimate Mid-Drive Chain Care Thread with
Like.
It is a 11-speed Shimano CS-M5100 with the 5 smallest sprockets replaced and matched (a custom build). So, the gear spread is 2 teeth... -
Thanks, since I already have a cassette on the way, I'll put the small cog on the old cassette to see if that solves the problem. Since...
-
PedalUma reacted to Gionnirocket's post in the thread The Ultimate Mid-Drive Chain Care Thread with Haha.
Usually you get slop in a cassette from too much fast forwarding and rewinding. Since switching to CD and MP3, it's a non issue. 🙃
-
PedalUma replied to the thread The Ultimate Mid-Drive Chain Care Thread.The thing to consider is the smallest cog may only have 5 teeth in contact with the chain at a time because it has 11 teeth. But with a...
-
-
PedalUma replied to the thread Immediately Stop Using Ridstar E-Bikes Due to Fire Hazard.The fireproof bags sound like a great idea when transporting one of these sketch batteries to be recycled.
-
PedalUma replied to the thread Immediately Stop Using Ridstar E-Bikes Due to Fire Hazard.
-
PedalUma posted the thread Immediately Stop Using Ridstar E-Bikes Due to Fire Hazard in General Ebike Discussion.https://www.cpsc.gov/Warnings/2026/CPSC-Warns-Consumers-to-Immediately-Stop-Using-Ridstar-E-Bikes-Due-to-Fire-Hazard-Risk-of-Serious-Inju...
-
PedalUma reacted to stompandgo's post in the thread The Ultimate Mid-Drive Chain Care Thread with Like.
Gudentight is good enough. I've never used a torque wrench on a cassette lockring.
-
PedalUma replied to the thread The Ultimate Mid-Drive Chain Care Thread.Sometimes I buy generic or not top brands. I purchased a box of sintered brake pads this week. 25 pairs with pins and stainless springs...
-
PedalUma reacted to stompandgo's post in the thread The Ultimate Mid-Drive Chain Care Thread with Like.
There are some really good fake identification videos on Youtube. They are not hard to spot once you know what to look for. Some eBay...
-
PedalUma reacted to smorgasbord's post in the thread The Ultimate Mid-Drive Chain Care Thread with Wow.
combined with: Suggests to me that the skipping problem was not cog wear but the cassette coming loose, which, as @stompandgo points...
-
Hey Trey — sounds like the DAS kit/controller swap is the common trigger here. A few quick things I’d check: 1.Reseat every connector...
-
I have a metal cutter, too. I won't have to crank it manually after I fasten it to the cogwheel on my derailleur. That's a job for J B Weld.
-
PedalUma reacted to stompandgo's post in the thread The Ultimate Mid-Drive Chain Care Thread with Like.
Yes, you have the removal tool and the whip. There is no reason for any cassette cogs to be loose unless they were installed...
-
Thanks, I have a luna tool kit that came with one of my bikes. It has a whip and a cassette removal tool. Pretty sure it will work...
