PedalUma's latest activity
-
The Shimano CS-M5100 is an all steel 11-speed cassette, 11-51T, which is installed on my Vado SL. I could even modify it for equal... -
We have a 11-50 steel linkglide cassette 11 speed on our tandem. lets you shift under load but on the tandem thats so clunky.
-
PedalUma replied to the thread From Class 2 to Class 1. How "hard" is it to switch?.On mini-bikes with useless pedals, (because the saddle height cannot be adjusted and the legs cannot be extended for pedaling) kids will...
-
-
PedalUma reacted to stompandgo's post in the thread From Class 2 to Class 1. How "hard" is it to switch? with
Like.
My Cannondale has the same DU (gen4 System 2 Bosch Performance Line Speed) and the bike has no brake cutouts. The brake levers (Magura)... -
PedalUma reacted to kevinmccune's post in the thread From Class 2 to Class 1. How "hard" is it to switch? with Haha.
a lot of the ebike commercials show smiling folks zipping everywhere without turning the crank at all.
-
PedalUma reacted to stompandgo's post in the thread From Class 2 to Class 1. How "hard" is it to switch? with Like.
You can't look at a Bosch motor like you can a Bafang. The Bafang is open, and it's compatibility is wide. OEM's that use Bafang...
-
PedalUma reacted to Gionnirocket's post in the thread From Class 2 to Class 1. How "hard" is it to switch? with Like.
On that subject I have my start rotation set at 1/4 crank. This gives me the option of starting with the pedal at 3- 5 o'clock and not...
-
PedalUma reacted to PCeBiker's post in the thread From Class 2 to Class 1. How "hard" is it to switch? with Wow.
@speedub.nate I don't know about your ebike, but my ebike allows me to adjust the amount of crank rotation necessary for the motor to...
-
PedalUma reacted to speedub.nate's post in the thread From Class 2 to Class 1. How "hard" is it to switch? with Like.
I'm not familiar with Dynamic so I assume the former, and almost for sure she's in Eco for what that's worth. Neither of us can...
-
PedalUma reacted to PCeBiker's post in the thread From Class 2 to Class 1. How "hard" is it to switch? with Haha.
My mid-drive motor has a shift sensor input that uses a hal sensor on the shifter cable to shut down the motor during shifting. I'm not...
-
PedalUma replied to the thread From Class 2 to Class 1. How "hard" is it to switch?.Is this the type of Bafang HD you like? It is trying way too hard to be Butch as compensation for what does not measure up. Yes, I...
-
-
PedalUma replied to the thread From Class 2 to Class 1. How "hard" is it to switch?.I am working on a Specialized Crosstrail with an overhaul today. It is a butch bike. I converted it about six-years-ago. Funny about...
-
PedalUma reacted to stompandgo's post in the thread From Class 2 to Class 1. How "hard" is it to switch? with Like.
We were talking about brake cutout switches and decelerating on an e-bike with and without them. I need to pedal to downshift. Some...
-
PedalUma reacted to Stefan Mikes's post in the thread From Class 2 to Class 1. How "hard" is it to switch? with Like.
Stomp, if you pedal full power on a mechanical drivetrain and shift, it ends up with a loud CLUNK, doesn't it. Easing up on the...
-
PedalUma reacted to stompandgo's post in the thread From Class 2 to Class 1. How "hard" is it to switch? with Like.
What's wrong with wires and hoses inside the handlebars?
