PedalUma's latest activity
-
PedalUma replied to the thread Just for fun....Generally I do not like crowds, but I would do that. Whichever the way the crowd is going is usually the wrong way. It is more communal... -
400 musicians and singers. as far as. I can tell this started in Russia. Some as big as 1000 people are playing. hundreds of drum sets...
-
PedalUma replied to the thread How many miles a year do you ride?.I would guess that I average about 10 miles per day of mostly stuff around town. I seldom do purely recreational rides, maybe five times...
-
About 3,000km this year, from mid-April to the end of September. I am currently riding my exercycle 5-7 days per week; the only change...
-
I should end up a little over 5200 miles this year. Probably 90% of that commuting, very little in the way of recreational rides the...
-
PedalUma reacted to fritz katzenjammer's post in the thread How many miles a year do you ride? with
Like.
Only about 2000 km a year. I suppose it’s not bad for a guy who only a few years ago was stuck behind a desk 9 hours a day. retirement... -
PedalUma replied to the thread Show Us a Tool.I just wanted the leverage. I mostly deal with cassettes and not freewheels and I don't care if I slightly mar the seldom used socket...
-
-
True. I usually just use a combination wrench or socket with a 1/2" drive for that. I think the largest Knipex Plier Wrench has a 16"...
-
Yes...but you typically need a long lever as the freewheel is tightened further with every pedal revolution.
-
Or you could get a Knipex Plier Wrench:
-
A new modern tool properly adjusted solves those problems.... or perhaps vise grips and a lump hammer
-
A poorly adjusted crescent wrench (adjustable jaw) will slip and round over the nut. A pipe wrench, while unorthodox, will grip like a...
-
fyi.... That's a pipe wrench... Jaw designed to grab round objects. If you don't have the correct socket and breaker bar.. use the...
-
Do you use a sledgehammer to remove bearings?
-
