Recent content by Pawel69

I replaced the carbon handlebar (Race Face) with an aluminum one (Pro) because I had to drill holes for the hydraulic hoses, and for obvious reasons, I didn't want to do that on carbon. If you have a handlebar designed for internal routing, like a OneUp or Pro, the holes should be the correct...

Thank you :)

Two things: Hole in the handlebar between the stem clamps to route all the cables to the head tube, and 2 for brake cables Cutting the cable between the display and the switches to extend it. Unfortunately, Yamaha doesn’t offer other kits with longer cables, so you have to do it yourself :)

Yes, it's new wireless XTR Di2 RD-M9250-SGS

3, 4, 5... up to 12 with a single shifter press....whole cassette in 3 seconds :)

Finally. The wireless cockpit project can be considered almost complete. I'm still thinking about what to do with the front brake cable—leave it as it is or route it through the head tube?

Since the handlebars were already prepped for the "grand finale" yesterday, all that was left for me was to finally cut this cable to extend it and route it through the middle. It’s a four-core wire. Once I’m done, I’ll share photos of the finished (or nearly finished) cockpit with you. If you...

Hi, I didn’t have to drill anything because the handlebar already had the necessary holes for routing the electronic cables. The only holes I had to make were for the brake cables. I already had the X Interface with the bike, and I use Bluetooth with my phone instead of a Sigma display, which is...

You have famous Kazurka :)

Not so far - Silesia :)

I have booked. As soon as they come in stock, they'll be at my place the next day :)

This is old diagram for old system. I need this one for Interface X, especially to know how many cables are in wire connecting switch with display.

XTR Di2 wireless is in two option GS and SGS. I need SGS 12 speed version for bigger cassette.

This offer I know. Finally I will buy it, however I looked for a something smaller. And second thing - how many pins I need for this cable (I want to know before I will cut the cable or buy each of these :) )

Hi Stefan, As you noted the seatpost and wireless derailleur is the least of the problems. The seatpost is already there - Magura Vyron V3. I'll have to wait a bit for the XTR Di2 wireless derailleur - it's not available from the distributor in Poland As for the other stuff - I'm changing the...