Recent content by NeverL8

I just bought a used 2018 Turbo Vado 6.0 which had the battery stolen (Abus lock was drilled out). The original owner didn't want to deal with issues with the bike as when he took it into the LBS and have them install a replacement battery, it did not work and they were going to charge him a...

I've read other threads and my go the Kiox route if I can find an used one for a good price (because I'm a cheap bast###, lol) As for rich c question, mine is a 500 pack and my frame actually have a small hole cutout which the reset switch for the battery underneath it perfectly aligns for a...

I did use blue masking tape to try to sand out like 1/4 in to see if it helped. The scratches are pretty deep so I may have to live with it unless I either upgrade or find another used one with a good screen.

It was actually something extremely simple and I was a total dummy for not doing so first. Just had to press the reset button for 10 seconds and all is well. Thank you all for your input in trying to help. Now, onto another issue....... My purion screen is badly scratches from turning the...

Thanks for the advice. I'll run it to a LBS. If its just battery, I would not mind replacing it if that fixes the problem. I'll write back with an update.

Yes, a used bike, only 700ish miles on the odometer. Battery is at full charge. Is there a voltage test I can do or anything myself? I like to do hands on work whenever possible. thank for the assist fooferdoggie.

Hi everyone, new here. I just bought a used 2019 Fuji Blackhill with Bosch Performance CX (I believe Gen 3?). The Purion screen shows no error and turns on and off with ability to scrolls through. I am able to put it in walk mode and it walks the bike for about 3 seconds then stop so power is...