Gionnirocket's latest activity
-
Gionnirocket reacted to James Nagy's post in the thread Splice motor cable to controller. with
Like.
That was my next thought. Like a dummy I didn't check the pin out on the thin HALL sensor wires but the 3 higher guage wires are the... -
Thank you very much, I'll look to swapping it's gender.
-
Gionnirocket replied to the thread Can anyone help me out?.My understanding and experience is that all Bafang UART displays are interchangeable. All I've seen come female on the display side...
-
Gionnirocket replied to the thread Can anyone help me out?.From a quick Google search it looks like that display is Bafang UART compatible. Is your motor a Bafang? Is this you...
-
Gionnirocket replied to the thread Splice motor cable to controller..Are you sure the color of the wire to pin_out location was identical as the stock cable? You may have swapped a pin or two if you just...
-
Maybe a bigger chainring might be possible, so your running in 5th, 6th or 7th gear with more teeth to share the wear and a straighter...
-
That's what I think is going on. 8th gear and your chain have worn out together and the spacing between your gear teeth has increased...
-
Try getting a close up picture with a good camera or cellphone. You may be able to see some wear? With 7th and 9th gear right beside...
-
Gionnirocket replied to the thread Headlight.I don't ride much at all at night... but I ended tapping the battery and still using a stock lower wattage head/tail light set. My...
-
I ran into this issue when I looked at replacing my OEM bike light. In my case, I was limited by the current the fine gauge bike wiring...
-
Gionnirocket replied to the thread Lugging a Motor, Why it's Bad.Yeah I did a little reading and it's the ability to get a more exact chain legnth that is the 1/2 links designed benefit. Though...
-
Gionnirocket replied to the thread Headlight.6v/500ma...so you'll be limited to the total watt output. If you need more light you can tap the battery and add a switch or use the...
-
The pitch or length between pins is identical, but single speed chains are wider, so force is dispersed over a larger area. Kids are...
-
Gionnirocket replied to the thread Lugging a Motor, Why it's Bad.Not cable tension... Derailleur adjustment. And what do you mean by slipping? Not staying in that gear? Chain riding over the teeth?
-
Gionnirocket replied to the thread Lugging a Motor, Why it's Bad.If you haven't tried a derailleur re_adjustment, that's where you should start. Then as @PedalUma says perhaps your hanger is out. But...