Recent content by dhealys

can you provide more info on how you did this. also where did you get kt controller from. can you post link

thanks, im also looking at the sram ex1 horizon, Shimano Deore XT RD-M739 8-Spd is quite old (1995) so looking for something more modern. im wondering will ex1 it work on my bike, after doing some research seems they are only suited for mid drives with the sram11-48 tooth 8 speed cassette...

thanks you know of a good shifter as the one i have is terrible. cant see the dials.

hi, i have a ecotic hammer, and have basically replaced almost every part on this bike successfully. I recently had to replace the motor, so my existing shifter and derailleur was replaced to 8 speed, but ive had nothing but problems with this . the local bike shop installed an 8 speed...

hi, i needed to replace a burst tube inside the tannus armour, i was using a26x3.0 tube. i replaced it with a 26x4.o tube, and its working fine, is there any specific reason why we cant use a 26x4.0 tube.

whats the difference between datex2 and the cheap alternatives, cost $100 more.

yes a lot of confusion from bafang, they told me rear wheel was for both cassette and freewheel, which really confused me. so my understanding is that i need a cassette not a freewheel. as you can see from my pics its clear i have a cassette sloted one. i got the Shimano TY MF-TZ500 7-Speed...

I Know this is off the topic but what cassette or freewheel did you use.

hi this anybody know what freewheel sprocket will go on the BAFANG RM-G062 1000W-D REAR HUB MOTOR. ive ordered two from amazon and none of them will fit. really frustrating. would be be if anybody got one that is compatible.

I have 3.0 to 3.5 tubes, for 26x4.0 tires. im guesing you need 3.5 -4.0. dont really know why they list a range on tubes, im guessing your tube is too small. also use a round bin to install armour, it works wonders follow this video. id also suggest to contact tannus to confirm size. also...

hi tom, i bought a pair of maxis minion (26x4.0) i inserted a tannus armour into my rear fatty tire. i was also supplied with 3.0-3.5 tube, but have noticed other people using smaller ones. i inflated front to 20psi and rear with tannus to 15psi. i just wondering is your setup similar what...

Sorry what u mean,. So where did u get $144 for two as cheapest I found was 115 each. So we're you able to resolve problem.

hi i just ordered a pair of maxxis minions fbr/frf (26x4.) a little concerned with your post, as wondering will mine pop out as well. i installed tannus armour on 26x4.0 on a a Chaoyang Tire and it works a treat. i inflated that too 15psi. my rims are 80mm. Little concerned that you...

hi do you know what the specs of the motor controller on the hammer are. looking to get extra battery, but need to know specs of controller. econtic says its limited by 22ah, is this correct. so if I put in a 48v 25ah battery will it cut off.