3dxl's latest activity
-
3dxl reacted to stompandgo's post in the thread REVIEW: QR-E 250W ELECTRIC BOOSTER BICYCLE MOTOR AND B60i AND B70 BATTERY with
Like.
Holy seatpost, Batman!!! Seriously, clean build. -
3dxl reacted to Chazmo's post in the thread REVIEW: QR-E 250W ELECTRIC BOOSTER BICYCLE MOTOR AND B60i AND B70 BATTERY with Like.
Very slick, @3dxl !!
-
3dxl replied to the thread REVIEW: QR-E 250W ELECTRIC BOOSTER BICYCLE MOTOR AND B60i AND B70 BATTERY.QIROLL Prototype 400W+ finally installed. Hey guys, sorry for long absent, finally i got a bought a small 16" inch folding bike to test...
-
-
3dxl reacted to BluePixel's post in the thread REVIEW: QR-E 250W ELECTRIC BOOSTER BICYCLE MOTOR AND B60i AND B70 BATTERY with Like.
Hi Guys... I think this one is interesting for the ones testing new buttons :). I build a small and simple PAS Sensor which plugs into...
-
3dxl reacted to dangerzone's post in the thread REVIEW: QR-E 250W ELECTRIC BOOSTER BICYCLE MOTOR AND B60i AND B70 BATTERY with Like.
Speaking of sanding the tyres smooth, I've been using the belt sander and with my spring contraption to provide constant pressure. I've...
-
3dxl reacted to EMGX's post in the thread REVIEW: QR-E 250W ELECTRIC BOOSTER BICYCLE MOTOR AND B60i AND B70 BATTERY with Like.
I made up another switch using latching rocker switches. I think I'll stick with this and may or may not add a brake cut out. The 6 ft...
-
3dxl reacted to Charlie Pendejo's post in the thread REVIEW: QR-E 250W ELECTRIC BOOSTER BICYCLE MOTOR AND B60i AND B70 BATTERY with Like.
Thanks yet again. It makes sense the 4" version would be stronger than the 2.75" I'm using. Two reasons not to switch: (a) It's too...
-
3dxl reacted to EMGX's post in the thread REVIEW: QR-E 250W ELECTRIC BOOSTER BICYCLE MOTOR AND B60i AND B70 BATTERY with Like.
Does your spring hinge hold the roller tight enought on the tire to prevent slipping especially in the high setting? I tried my Qiroll...
-
3dxl reacted to Charlie Pendejo's post in the thread REVIEW: QR-E 250W ELECTRIC BOOSTER BICYCLE MOTOR AND B60i AND B70 BATTERY with Like.
Thanks. Stainless, and confirmed my cheapo "high speed" bits got nowhere. I had +some 1/4" aluminum intended to make a sturdy...
-
3dxl reacted to Charlie Pendejo's post in the thread REVIEW: QR-E 250W ELECTRIC BOOSTER BICYCLE MOTOR AND B60i AND B70 BATTERY with Like.
Predictably this project has me repeating "this is why I'm a software guy." Bolted hinge/motor assembly to strap But even this...
-
3dxl reacted to Charlie Pendejo's post in the thread REVIEW: QR-E 250W ELECTRIC BOOSTER BICYCLE MOTOR AND B60i AND B70 BATTERY with Like.
Getting close. 3D printed adapter seems fine, and simply bolting it to a stretchy velcro-based strap seemed like it'd be plenty secure...
-
3dxl reacted to EMGX's post in the thread REVIEW: QR-E 250W ELECTRIC BOOSTER BICYCLE MOTOR AND B60i AND B70 BATTERY with Like.
Still trying alternatives to the stock control switch. This time using latching pushbutton switches instead of temporary blade. The...
-
3dxl reacted to EMGX's post in the thread REVIEW: QR-E 250W ELECTRIC BOOSTER BICYCLE MOTOR AND B60i AND B70 BATTERY with Like.
I didn't so much like the qiroll hanging down from the kickstand bracket so I attached it from the topside. Less prone to damage and...
-
3dxl reacted to dangerzone's post in the thread REVIEW: QR-E 250W ELECTRIC BOOSTER BICYCLE MOTOR AND B60i AND B70 BATTERY with Like.
Thanks for the info. It's certainly neater than the zip tie, bent coat hanger and springs from an IKEA desk lamp contraption that I had...
-
3dxl reacted to dangerzone's post in the thread REVIEW: QR-E 250W ELECTRIC BOOSTER BICYCLE MOTOR AND B60i AND B70 BATTERY with Like.
To answer my own question about Brompton compatibility. It does fit in the rear but involves removal (or trimming) of the mud guards...
