Latest activity

  • Cybersnow
    Cybersnow reacted to PCeBiker's post in the thread Rohloff or not? with Like Like.
    I had Tannus inserts, Flat-Out and Mr Tuffy tire liners on my first ebike. I spent the $240 on Tannus inserts strictly because Tannus...
  • Cybersnow
    Cybersnow reacted to Gionnirocket's post in the thread Rohloff or not? with Like Like.
    The electronic version I believe at this point is still only reserved for bikes with a Bosch motor as it ties into the system. Mine is...
  • Gionnirocket
    In my parts we either ignore or twist the nipples of the elite thinkers. The latter being much funnier. 🙃
  • Cybersnow
    Cybersnow reacted to 6zfshdb's post in the thread Rohloff or not? with Like Like.
    I used Tannus Armor foam inserts with slime filled tubes successfully for several seasons. I did not deflate the tires when the bike was...
  • Cybersnow
    Cybersnow reacted to stompandgo's post in the thread Rohloff or not? with Like Like.
    Tannus inserts can help prevent flats, but when they don't, they are more work than just tubeless to replace. My advice is, if you are...
  • Cybersnow
    Cybersnow reacted to Rás Cnoic's post in the thread Rohloff or not? with Like Like.
    Most tourers carry a spare belt just in case, especially if riding in remote areas. But they fail only extremely rarely and it's a 5 min...
  • RabH
    Rode over to Arastradero Park from my house. Had a short break at the pond. The weather cooled down, so it was a nice mellow ride. 26...
  • Cybersnow
    Cybersnow reacted to PCeBiker's post in the thread Rohloff or not? with Like Like.
    And it always takes ten times longer than the second time. I always try to do stuff like that at home to figure out how to do it, and...
  • Cybersnow
    Cybersnow reacted to peterh_nz's post in the thread Rohloff or not? with Like Like.
    Yes, quite straight forward. However I've never had to remove the wheel for puncture repair (tubed tyre). It's easily done in situ.
  • Rás Cnoic
    Dwars door Vlaanderen finale! Heartbreak again for Van Aert. Only consolation as I said above, is he is clearly on form. But this will...
  • Cybersnow
    Cybersnow reacted to Aushiker's post in the thread Rohloff or not? with Like Like.
    In my case the same as with a chain execept that I have to disconnect the cables to the electronic shifter.
  • Cybersnow
    Cybersnow reacted to PCeBiker's post in the thread Rohloff or not? with Like Like.
    All this Rohloff talk, now I want one. I could put my hub drive on the front with the Rohloff on the back connected to my BBS02B?🤔...
  • Cybersnow
    Cybersnow reacted to PCeBiker's post in the thread Rohloff or not? with Like Like.
    Yes, but we didn't tell her dad about it. 😁 Adjusting the belt tension was a PITA because there wasn't enough room to fit a deflection...
  • Cybersnow
    Cybersnow reacted to Gionnirocket's post in the thread Rohloff or not? with Like Like.
    I believe it needs to produce an F♯ when plucked 🙃 Did you try spanking her with one to see if it met specifications
  • Cybersnow
    Cybersnow reacted to PCeBiker's post in the thread Rohloff or not? with Like Like.
    I don't know much about it, but I had a girlfriend in the late 90's who's father worked at the Gates belt factory here in Southwestern...
Back