Anyone charging their Easy motion carriage with FAST charger - and How ??

[Ebiker01]

I had experimented with a Luna cycles 5amps charger, run into issue due to the bat. Connectors.
Only viable option is to Bulk purchase on Alibaba 100+ chargers(4 or 5/6amps) from the respective Chinese factory that makes the Modiary chargers(that’s the brand, is written in the charger). And they have the right connectors.
A new charger in Us is 145$ !!’??. Is about 15-30$ if bought in bulk...
My pack is 600wh, i have the Nitro city and a 2amp Charger for such a high end fast bike is a shame. Probably the only bad thing with the newer bikes from Easy motion.
A 4amp would be ok for the cells imo, anyone else has any similar exp. to share ?

 

[Ravi Kempaiah]

I know one of the members here on Easy Motion forum bought the cycle satiator and connected the proprietary connector to the XT 60 leads.
There are two parts to this charger cable right and you should be able to make it work.

Can you post a pic of the charger cable so people can help you better?

BTW, that is a fast bike. Really enjoyable ride.

 

[JRA]

Get a Grin Satiator, you will spend for it but it will last forever and take whatever battery voltage or chemistry you would ever need.

 

[Ebiker01]

I know one of the members here on Easy Motion forum bought the cycle satiator and connected the proprietary connector to the XT 60 leads.
There are two parts to this charger cable right and you should be able to make it work.

Can you post a pic of the charger cable so people can help you better?

BTW, that is a fast bike. Really enjoyable ride.

1) Yea, is very dependable, much better quality than 2015/2016 Easy motions. I tried the Stromers too but too bulky. This one is very maneuverable and sexier too.
2) I had connected the wires from my old chargers to the Xt60’s from Luna cycles. Did not go well. Had to get a new charger and reconnect the Bms.
Waiting for an. answer from the people @ Grin for the satiator.

I included pic with the emotion bat. Connector.
There are 3 wires in there, i connected the +,- To my Luna 5amp charger and it got the Red LED for 1-2seconds then off . Turns out that tripped the Bms.
The 3rd wire is for temp. Regulation, left it aside. So, i’ m researching new ideas and proven ways. Another battery to carry is too heavy, and 4hours to wait on a full charge is a looooong time.