Search results

I ordered these items. Recieved 8-9 months later, after I figured out a fix. These were for a Lectric 3.0 XP new cost me $150. Sell for $75 plus shipping.

I started this thread. Sc00ter fixed me up. I had also ordered a new neck/ bars from David brand new. After 4-5 months I decided to cancel the order. I e- mailed at least (6) times w/ no response. I found a better set up. 8 months later the David brand new stem and bars is at my house, along...

Don’t know what happened, but I was unable to get back on this forum. Anyway I finally got my wife and my E-bikes set up. Had to set seat back 3”, new bars and reversed neck. FWIW I had ordered a short neck from David brand new. I cancelled / e-Mail several times after 4 months, but they sent...

I have power tools and equipment as well with lithium batteries. I use a simple small 110v plug in timer w/1,2,4,6,and 8 hour push button controls, plug your charger into it and shut off at the time you desire. Cost me $12. A certified product too.

So I took the OEM reflectors off the wheels and installed the neat spoke reflectors on. Looks trick on every spoke/both sides and now has probably 4-5 times the capability of being seen from almost any angle.

I ask some of the same questions. I though that since I was going to buy (2) they would work with me a little-(Not). I bought (2) long range XP3 folders anyway , the rear basket is good. The other racks and baskets I didn’t even use. Did not use any racks or baskets on my wife’s bike. she...

I bought my wife and I each new XP 3.0 folding step through e-bikes. Eventually I will need to install new brake pads. I see several or various ones on Amazon. Our bikes did not come w/ any parts manuals. I’m guessing Lectric bike co. Sells the pads, but are OEM as good as any ? Are there some...

Maybe answer my win question. Look up the legal requirements for front,side, rear reflection. Side can be tires w/ reflective strip, rims with same or the spoke mounted type. I think I’ll look for some wheel adhesive type. Be nice if someone sold long specific strips instead of the small pieces...

I’m all for safety, but a lot of the wheel/ spoke mounted reflectors are poorly made and many just break. As long as I have frame mounted reflectors ( red rear, amber side/ front and white front) are the white ones that that come on the wheel/ spoke required to be legal ? Thanks for your replies.

Thanks, your right. I forget about capacitors holding a charge for some time. Didn’t think about them in all the P/C boards and circuitry, but I guess it’s necessary for anything/ everything made in the electronic components to work right .

Thanks sc00ter. I’m getting there. BTW, I’m still experimenting w/ bars for my wife’s bike. I turned the existing neck around 180 deg, and added some moustasche bars. Getting closer. I have some other bars coming that will work w/ the shorty I got from you. My wife insists the st up is identical...

I havebought (2) new XP 3.0 folder/ step throughs. I only have one set up ( correct dimensions, new bars. etc for my wife). I rode it about 1/2 block down to see if all works . My question. With the battery switched off. I note you can push the power button on handlebar and display will light up...

I have a new Lectric 3.0 step through. I want to wire in a two terminal plug to power a small inflator pump ( on Amazon ) that runs on 12v or 48v or 60v, voltage switch on pump it self ( guessing as I haven’t bought the pump yet) I just need a short pigtail ( SAE) to be able to plug the inflator...

M@Robertson-The pump running off the e-bike battery is the best solution yet. Thanks for the info and link.

Thanks for that.

I’m an old mechanical guy, electronic not so much. Maybe all the e-bikes have (4) terminals, don’t know. What are the (4) terminals for . I get it -positive and negative for the motor. Sorry if this seems like a dumb question Educate me. Thanks

Thanks !

Thank you. No problem with any bolts. SAE, course, Metric, I have some of everything in just about every length, thread pitch, etc. I used to build Robotics, retired for some time now. But I just gotta build stuff. More importantly is making everything fit for my wife.

I ordered the FX neck and BMX bars For my wife’s Lectric 3.0. We will see how that works. If that’s not a good combo I think w/the upan moustasche bars may be a good option. I think the bar size at the stem is a different size ( maybe) my bars are 31.0 mm- 1-1/4”. If this works I will change the...

That would be great. Let me know cost for shipping and/or what ever. Thank you.