Search results

Why not get the same type of carrier that you have now, only in 2 place, they come in Alum and steel, also get the type that has 1/2" bolts to make wheel pockets for the bikes, and use a 4' NO Hook ratchet straps around the wheels and carrier, for added safety, I have used mine for 4+yrs in...

Ped Do you have a site that explains your Paraffin waxing method, Would this be the best method for a HIGHLY MINERALIZED dirt/dust riding conditions? Tia, Don

6zfshdb It looks like a 5 pin Hailong plug with a pos and neg wire, attached to each outside pin. The female side is in the battery and I am afraid of messing with that part. I don't know how to post photo's here, Sorry.

I took apart my 5 pin battery base on my Biktrix Juggs 4 bike, (battery slides into and locks the battery to the bike), I found these numbers molded into the battery discharge parts, Retention??<(hard to read), PLA-2099 and PLA-2049. I used the above numbers and failed to find any information...

Caspan Thank you for those measurements. From the measurement photo #1 (L >R), this is the way I measured my plug and got a reading of .750" outside to outside. Your plug measurements, .857" - .750" (my plug measurements) = .107 difference to wide. Your plug is .107" too wide to fit my...

Mr Caspan When you get your battery plugs, Can you please let us know what the outside to outside distance if the flat blade pins are, on that brand/type of plug. Thanks,

6zfshdb What kind of epoxy did you use to build your plugs, I am tired of attempting to find the correct spacing plugs to fit all my battery's. I'll machine out a holder for the correct spacing and fit the proper/correct pin to it, then use epoxy to make the plug. I have to make 2 different...

6zfshdb Thanks for the info, I am looking for a .750" = 4 pin and a 1.125" = 5 pin type ends, with the female ends. I have the 4 and 5 pins that you show, I just may make a saw cuts between the center pins to reduce the spacing for the 4/5 pin. I have 2 different widths of 4 pin spacing on...

6zfshdb I am glad you find these 4/5 bladed pins are easy to find, I have been attempting for the last several days to find the outside to outside width/distance of the 4/5 blade pins plugs. All, I get back is send a photo, so we can match it up. I have requested the O/S to O/S...

I found out the same thing, on the Wart Hog bike, when I was experimenting with the chain fitting, using a single rear gear as a result of destroying the derailleur, during a cow/horse trail ride, had to move the chain forward or backward to get a good fit. That's the reason I have a chain...

Caspan I have a battery extender on the Juggs 4 bike which takes the 1.125" measurement for the 5 pin plug, and the in frame OEM battery takes a 4 pin plug with a .850" measurement. I have made a extra cable that fits the Jugg4 bike to the Warthogs battery's (4), now I have LOTS of extended...

Mr Caspan Make sure the outside to outside spacing measurements are the same as you need. As I have found out, there is several different spacing widths for the 4 and 5 pin plugs, of these type of plugs. I have these plugs, 4 pin = .850" outside to outside measurements, 5 pin = .900" outside...

Put FLAT OUT in the tubes, I have a Blue Billion of those )S%F#S Goat head stickers around here, Flat Out works, try it you'll like it.... https://www.amazon.com/FlatOut-Off-Road-Equipment-Prevents-Contains/dp/B06Y6BHNDK/ref=asc_df_B06Y6BHNDK ymmv

"Nam 1968, Johnny Horten, "Whispering Pines". In a land far away and a LONG time ago. (57yrs ago)

I just received this info, very interesting, and getting tougher.....now if the price will come down a wee bit.... https://bikebac.com/en-us/collections/abus-bike-locks/products/granit%E2%84%A2-super-extreme-2500 ymmv

Here s a site that has numerous bar shapes and spec's, that can be super imposed over each other to see the results, https://whatbars.com/ Just choose an approximate bar shape to start with, then switch back and forth, makes choosing a better choice.. ymmv

Harry S THANK YOU for that information, Great need to know info, added to my library.

I cover my Juggs 4 bikes display and throttle areas with bags and tape to seal off the area, I have sheet of HD plastic that is approximately 24" wide and about 6' long, I completely cover/wrap the battery area and use a couple of HD straps and tape to seal the top and bottom edges. The...

I adapted this air pump to work off my bikes battery, https://www.amazon.com/gp/product/B0986MWSFX/ref=ox_sc_saved_title_8?smid=A1I0M5B37LZH6O&psc=1 See this post on how I did it, https://forums.electricbikereview.com/threads/which-is-the-hot-side.56380/ Works very well, and I always have a...

Aushiker I now use this setup on all my bikes, work very well,, all I have to do is move the mini cam to whichever bike I want to ride: See info here: https://talesontwowheels.com/2023/03/12/diy-bicycle-front-and-rear-dash-cam-part-1/ ymmv