Search results

Weird, I cannot find a round connector cable indeed, just the diamond shaped ones

100% true, but in most cases when you are in between two frame sizes you can over come most with stem angle and saddle position. And yes I personally have a very weird position on a bicycle... Both knees are worn out (since when is was 15) so I sit in a more tri-hip position and overstretch my...

The one that should work for this system would the 5271536 which can order at a Trek dealer

If the 46 fits better than get the smallar one. The "problem" with powertube frames is that the downtube has a minimal length. So for our brands I do now that the seattube angle and hight are the ones which are different for the smaller frame sizes and some other brands share 2 or 3 framesizes...

Most important factor is the reach, so the distance between the saddle and the handlebar. So I wonder why the 46 felt better than the 53? You could alter the position a bit by moving the saddle to the front and set the stem (part between fork and handlebar) a bit more upright so the handlebar...

In Europe we go for Cyclus, Unior or Hozan. And if not in your price rangen something from Birzman, XLC or BBB could do.

Would be a tool like this for the spider lockting https://www.bike-components.de/de/Cyclus-Tools/E-Bike-Motor-Lockring-Werkzeug-Snap-In-SN-85-W-fuer-Bafang-p90109/ And a JIS compatible crankpuller like this https://www.bike-components.de/de/Shimano/Kurbelabzieher-TL-FC10-p6806/ Keep in mind...

This is what the chain ring carrier looks like

interesting write up for these tpu tubes https://www.cyclingweekly.com/products/can-you-trust-tpu-tubes-in-a-pinch-what-to-know-about-cyclings-newest-tube-type-a-deep-dive-on-a-thorny-topic

recently got a Tatonka hip/bar pack. fits underneath the frontlight and is easy to carry on and of the bike. Fits a lot off stuff you would want to take with you.

Btw, did you check if the creaking is indeed coming from the drive train? Like in another thread, did you check for the creaking sounds when you are out of the saddle with force on the pedals and what happens when you just barely touch the handlebar? Could also coming from a lot of other places...

The chainring can either be one piece or on a spider like above, like with other brands this assembly is over a splined shaft and the locknut is a left threaded nut, for Yamaha just a regular nut where oither brands prefer to use their own nut for which you would need a special tool. Did you...

Or ride faster than the speed limit of the e-bike ;D also no noise and more training effect.

This is what i get as a readout from the rox4 Ride full against the wind

depending on the type of lockring you would need a left torque wrench, a 36mm (thinwall) socket and set the torque at 25Nm for the Alu and 35Nm for the steel locknut.

New recall on the Giant Vida E+ https://www.cpsc.gov/Recalls/2025/Giant-Bicycle-Recalls-Momentum-Vida-E-E-Bikes-Due-to-Crash-Hazard

our bikes are equipped with the S216800009 TURBO CONNECT UNIT DISPLAY (TCU) The data fields are available with the S216800020 MASTERMIND TURBO CONNECT UNIT DISPLAY besides that, with are "traditional" touring bikes (like in camping trips with panniers) we do carry bike computers, mine is in...

btw, those are great to get a crown race of a fork crown https://www.trailerandtools.nl/Universeel-trekker-set-30-tot-50mm-Lagertrekkers-SATRA for example PT has a tool which is way overpriced

https://uniortools.com/eng/product/360-6B-tube-cutter some bike-tool companies have them in their offering. I do have a few of m, works fine on handlebars and steel steerer tubes. For Carbon we use a saw and guide.

https://www.winora.com/nl-en/p/yucatan-r8f-wyan1/ https://doctibike.com/nl/fietsaccu-yamaha/4591-xlc-range-extender-yamaha-360-wh-voor-haibike-en-winora-motoren-yamaha-4055149510473.html This could be something to look into. Belt, Yamaha, 27.5"