Search results

I too am somewhat perplexed. It still smells a bit like battery to me. A battery can fully charge and show the 54.6V and still have some weak or defective cells. Applying enough current can cause the voltage to sag enough to trigger LVC. A couple of thoughts (and I'm grasping here) If you can...

After reading thru all this - symptoms, etc., my (un)professional opinion is that you are reaching LVC on the battery or controller which is causing the shutdowns. This could be due to a worn out or defective battery. I'm not sure why one would ride in PAS 6 all the time.At that level, you are...

Very good info...thanks...so your modded T1000 is treating you well these days? My Amego Infinite+ (aka NCM Milano plus) is still going strong

When it is necessary to replace the Das-Kit controller, a few folks have chosen to spend the money on a more capable (programmable, higer amperage, etc.) controller and display. Can be a bit of work to get all the connections right, physically locate the controller on the bike, etc., but there...

I'm sure many of we Das-Kit owners would be interested in how this works out....as we likely will deal with it at some point. If you have time, maybe take some pics along the way to share? If worse comes to worst and you need to relace a new motor into your wheel, I'm sure you can do it. I had...

Who knows!!⁉️

A mechanic at one of the dealers once told me in the neighbourhood of 10,000Km,,,but I'm sure some get more and some less. I believe the Das-Kit motor is a rebranded MXUS -- so should see the same chracteristics. I personaaly have about 6,000Km on mine.

Very good! Sorry I can't help. When you do get it done, maybe you could post result here? I my want to do something with mine as well.

Have you tried the University of Google/YouTube? For example:

Does anyone have any experience with that particular display on a Moscow/Milano, etc.? It looks like it gives access to more parameters.

No

I'm into this discussion late, but if I understand what the goal is, it is to provide a constant voltage to the controller even as the battery discharges or sags as it is being used? The idea being the controller/motor would then respond consistently throughout the discharge cycle of the...

I have used a 1000 watt space heater or even my George Foreman Grill - The heater draws around 4 amps at 48V.

Thanks for the data. Sounds like it is performing very well. Do you know what current you were discharging at?

I don't profess to be an expert on this, but as far as i know the Milano+ has an 8-speed threaded freewheel (mine does) and a freewheel removal tool like the one I pointed to is what is needed. However, if you're taking it to your LBS, no doubt they will get it done. You might take note of what...

You can get a freewheel removal tool from Amazon at: https://www.amazon.ca/Baosity-Universal-Cassette-Flywheel-Freewheel/dp/B07MH7B4ZL/ref=sr_1_42?crid=2T0RHJGKRDO3P&keywords=freewheel+removal&qid=1682202745&sprefix=freewheel+removal%2Caps%2C127&sr=8-42 If you want the Park Tool version and are...

I believe it is a rebranded MXUS motor.

This site appears to have some. https://www.canadabicycleparts.com/wheels-tires/rims/wheel-diameter-27-5in/?p=2

I'm not sure about this, but I thought this simulated torque sensor business had to do with PAS and that it meant that each PAS level could be based on % max current and not speed (which is what the Das-Kit controller uses) . My programmable Bafang BBS02 gave the option to use either "speed" or...

I'm attaching a table which gives a rough idea of the relationship between voltage and capacity remaining of a 48V pack. This table would suggest that at 46.8V, you have about 50% remaining....note that this is a rough estimate only.