Search results

  1. indianajo

    interesting new garmin radar data

    My varia RTL510 is a piece of ****. Warns me about trucks on the interstate 500' to the side through the chain link fence. Warns me of cars 3 lanes to the left of the sidewalk I am on. Warns me of lawnmowers in yards to the side. Warns me of cars approaching a 4 way stop sign from 90 degrees...
  2. indianajo

    Mechanical Cable Actuated Disc Brakes

    I've been warning newbies about cheap imitation steel cables in Rad and other bargain brands for 6 years. It was amazing when I bought a yuba bodaboda in 2017, and did not have to adjust the cables every 2 weeks. I had been riding Diamondback and Pacific, kiddie bikes for people with short...
  3. indianajo

    Newb choices?

    I ditched the pedal assist, which was always too fast and dangerous for the berms of highways I ride. I use throttle only, on a front hub drive. I get about 5000 miles per 8 speed chain. Mid drives get less. I ride unpowered about 80% of the distance, unless the headwind is >12 mph. Yamaha...
  4. indianajo

    Riide e-bike not charging

    Lithium ion batteries that sit unused for years, lose the mobility of the ions. Green light on the charger indicates the battery is at full charge. But it will not run the motor. A gradual discharge, like the headlight, down to 75% or less, then another recharge, can reactivate a battery. I...
  5. indianajo

    New battery issues

    Did you charge the new battery first? I bought 2 garbage batteries, one from Amazon btrbattery one from Ebay sunebike baldwin city warehouse. The 3rd one from lunacycle.com actually worked. Was your vendor as reputable as lunacycle.com? That one cost more than the other two added together...
  6. indianajo

    Popped my rear wheel

    Hose clamps are not designed for this.
  7. indianajo

    Manual brake sticking

    Best luck with the warranty work. I have Tektro cable calipers with about 12000 miles on them. I have had no trouble with failing to close. If cable clamp is not tightened properly, the cable can come loose. Brake pads, the gap should be about 1/64" with the brake handle released. I tighten...
  8. indianajo

    Hi everyone!

    Welcome to the site. Congratulations on using mains power instead of fossil fuel. I have ditched the automobile, mow the yard electrically, but have a diesel tractor for mowing fields. If you don't mow fields, when you sell the price of the bulldozer to scrape the trees off the land and burn...
  9. indianajo

    Popped my rear wheel

    Pictures are made by devices made in *****. I do not buy things made in *****. I put the screw through a hole drilled in the torque arm, and through holes drilled in the clamp. The clamp wraps the bike frame. No holes are drilled in the bike frame. I put the clamp in the direction so the fold...
  10. indianajo

    Popped my rear wheel

    I do not know what that is "securing' the torque arm, but it appears to be a flimsy tag. Or perhaps a shredded worm type hose clamp. I use a #10-32 screw through a 1" wide 16 ga steel clamp I cut out of a box fan shell. I cut the steel with a weiss snip. Use kevlar gloves. I wrap the clamp...
  11. indianajo

    Battery cutting off.

    I bought a couple of batteries that measured fine until I drew more than 100 watts, when they would drop to 7 volts on 1, 11 volts on the other. Got my money back on the Amazon one. Having a continuous reading on the battery with a separate fast meter was key to spotting the problem. The...
  12. indianajo

    Spoke length?

    Spoke length is measured from the middle of the end of the bent part, to the end of the spoke. Nipple has to be removed. I use a 6" crescent wrench to adjust spokes. US, spanish or swedish made adjustable wrenches stay straighter than ****ese garbage. If nipple will not move, apply penetrating...
  13. indianajo

    New motor is thinner than the old?

    I have never gotten a new motor that matched an old motor, so every time I have to order new spokes from china. Nobody in USA on ebay stocks 2.5 mm spokes. Spoke length calculators are big liars so I just order a little longer or a little shorter than I have already depending on the change in...
  14. indianajo

    Condensation in Display=Sudden Loss of Motor Power

    Rain in the controller can cause loss of power or failure. Same can happen in the BMS of the battery. Ensure the entry of wires into any such component point down, are shielded from splash, and wires have a drip loop. I realize a factory bike, you have no control over the mounting or wiring...
  15. indianajo

    How much "power" do I really need?

    No 20" wheels for me. Been there, done that, 1957-61. I ride 26"x2.1" tires at 55 psi. Cargo bike, no suspension, no seat post spring, everything feels fine up to 4 hours. My hands & wrists go numb before my back & neck hurt. I second bithigh's experience, 8 mph average is fine. The extra...
  16. indianajo

    Way to force clutch/gears out of geared hub motor

    I value my tongue too much to ride 20" tires. Besides potholes that get covered in the rain, the city views driveways that have a 6 cm ledge as a perfect job. The bore of the non-slipping clutch was .001" too small compared to the 2 shafts. The key of the non-shorted winding plate was .0015"...
  17. indianajo

    Tire reccomendation

    When you saw up your old tire to put it in the trash can, if you hit a wire at the edges, it has a wire bead.
  18. indianajo

    Way to force clutch/gears out of geared hub motor

    I ride 80% unpowered. Summer camp is 27-30 miles, with 60 lb groceries on the uphill leg. I had a 1000 w DD hub, and hated it. It dragged unpowered like being in 2 higher sprockets than I really was. TOO MUCH EXERCISE!!!!!!!!! It still sits in the garage, unloved. Geared hubs don't drag...
  19. indianajo

    Tire reccomendation

    I bought Continental Traffic 2.1" from UniversalCycles.com 9/2/22. Have a thick enough tread to roll over the road trash, don't make the noise of Kenda knobbies.
  20. indianajo

    Way to force clutch/gears out of geared hub motor

    So I wore out the Mac12t clutch in July, installed a 750 w generic hub in August, burnt the winding on the second trip. Nobody in USA has a Mac12t 48 v 1000w and 750 w is not good enough for my safer route to summer camp. I had 6 bafang 350 watt motors from Uber jump fleet, burnt one in 2022 on...
Back