Search results

... and me home with a flat 7 miles from home on a very hot/humid day. Rear flat so I stood on the pedals and leaned forward and rode the throttle @10mph up many hills without damaging the tire or rim. Tube was scraped.

To me it appears as everything is backwards... Even the throttle rotation. It should be the lower V at start (at rest) ... Somewhere around 1.0v (you can see that in the controller default settings) Are you sure you have Bafang BBS* compatible hardware? Where do you have the test leads connected...

On the Bafang... If you enter the Start/End voltage properly in the programming. It should give you full smooth range on the rotation So in this example... Start: 0.9 End: 4.0

You couldn't give me anything from Meta.

I didn't want that much play in the brake levers cut out point. I rest my fingers on the levers often (carpal tunnel) and a slight bump could activate cut out.

You misunderstood.... You originally asked why you were plugging in to the display cable and not the controller directly. But the display cable is directly connected to the controller and has the Tx/Rx wires as the display needs to communicate with the controller as well. The Y cable only...

Yeah that's how I have mine adjusted... The cut out works just before the pads engage. I use it sometimes squeezing through the path narrow openings so I can pedal with no need to change PAS down and then on the other side I'm already in the PAS desired... and ready to launch quickly. Tektro...

Or add a second momentary contact push button on the opposite grip that needs to be held to operate the throttle. Seems like overkill to me since I've not had any issues.

Probably wouldn't be that hard to implement with a micro switch on a suspension seat post.

It does... Never understood the reasoning for that.

Well rentals should always be dumb'd down and imo... Always have break cutout.

Honesty I see no reason to do that. PAS 0 everything is OFF except walk mode. All other PAS the throttle works and if I want throttle without pedaling.... I don't pedal

Looks like being smarter than a twist throttle may be beyond the capabilities of some. Lesson 1: Get in the habit of always tapping down to PAS 0 whenever you dismount the bike. Lesson 2: Get in the habit of holding one finger on the brake lever whenever you walk the bike which disables the...

I've been using a (half ) twist throttle from day one. Much easier to modulate, especially over rough terrain. But if you're not smarter than one... then yes, please, please don't use one. 🙃

I haven't had it in a very long time. Pancakes I use honey and waffles I use berries/ whipped cream

As usual. .

It is a real problem. . I needed to buy some palm oil and all I could find was palm flavored soybean oil.

It seems some find ways to struggle with even with the simplest of tasks. . I personally prefer 1/4" socket bits as I have a variety of small/ large ratchet handles and extensions for right angle approaches. With the common sizes I have screw driver handled tools as well. Sometimes socket bits...

Balls with without brains is all we got now. And I'd even question the balls as it's much easier to have them when it's other's lives affected/destroyed. Take this Iran shit_show.... It's far from over and currently far less than the agreement that was shredded. I wonder if Ai can tell us how...