Search results

I still have some used but perfect condition Generation 2 motors for sale. MY<17 Performance Line (Gray, 20Mph) $200. With walk assist (that was disabled in the US before MY17). 6V light output, no dual battery. MY>=17 Speed (Black, 28Mph), 12V light possible and dual battery possible. $300...

Bosch service did not care what the third party does. They were like "Good luck, hope it will work again soon" in their email response. At the moment, the Connection Manager responds immediately and it is working fine.

Got some more information. It is not working again today. The issue is the connection manager (ipv4.connman.net). If this does not respond fast enough, Nyon does not connect. I created a local web server with a simple html site /online/status.html and the content X-ConnMan-Status: online Added...

It is working now, past 11pm. Let's see how it is again tomorrow during the day.

After Bosch moved the server to a different IP address (ipv4.connman.net [87.106.254.120]), it apparently works in Europe, but not here. Ping takes almost 200ms. While the Nyon 1 tries to connect to Wi-Fi, it is asking for response from the server. Unfortunately it is very impatient so that it...

The server is offline again. Not sure what they are doing. Pinging ipv4.connman.net [217.160.165.240] with 32 bytes of data: Reply from 212.227.117.208: TTL expired in transit.

After the Bosch support got a lot of complaints, they finally fixed it.

That is still working

It gets an IP address via DHCP from your router or hotspot. After failing to communicate with the Bosch server, it drops and shows that it cannot connect to Wi-Fi. So you will not get a Wi-Fi connection. That is too bad for those who thought they can fix it with a Nyon reset. That erases the...

No, I heard it first from friends in Europe. Bosch does not have a separate system for other continents. The data goes to the same location no matter where you are.

Correct. But why? There's a lot of customers using the Nyon 1 in Europe.

Or Bosch turned the server off. Here is what I see in wireshark

Maybe it is an expired certificate in the Nyon. Have seen that before with other applications that have hardcoded certificates

No. It's the Nyon. Nobody I know can connect. And nobody they know. Everyone already tried different phone Hotspot etc. The Nyon lists the Wi-Fi in range. And it only lists 2.4g I guess there will be a lot of people now messing with their routers etc until Bosch releases a statement. 🙄

The Nyon 2 just got an update of the maps recently. Same with the phone app. And here is the next strange thing. The offline maps in the app show the same new bike path as the new map in Nyon 2. BUT... When the Nyon 1 - with no maps installed - pulled the maps from the phone, it did not show...

If you have a Nyon 1 (no matter if the 1GB or 8GB version) and you cannot connect it to your Wi-Fi, you are not alone. Already heard it from several people and none of my 6 Nyons can connect to Wi-Fi anymore. Apparently that started on June 1st. Nyon software version 1.10 for 1GB and 2.10 for...

Better than nothing ;)

Performance Line 60Nm Performance Line CX 75Nm Active Line (50Nm) with modified shunts >80Nm 😁

It does not limit the current. Not sure why that is so hard to understand. The Gen 2 does not even have that setting. You can only chose between 12V and 6V if it is MY17 or higher And for the Gen4: Depending on the wattage of the installed lights, it will keep a reserve in the battery to run...

All BES2 are compatible. From Gen2 to Gen4 (not Gen4 BES3 which is the BDU38, smart). Batteries, computers, everything. The Intuvia is even compatible with the Gen1 that was never released in the USA. Unless the motor does not have ANY programming, then it will not work well. Only thing that...