Search results

Well I bit it on my ST1. Took a very sharp left turn (more than 90 degrees) on very uneven/bumpy pavement and had my left foot/pedal down and it scraped on the ground and the bike spun out under me. I flew over the bike, landing on my belly/arms. I was able to get up! I'M ALIVE! No...

What aftermarket lights are people putting on an ST1 and can they be wired into the ST1 battery system. I'm very interested in this.

If you buy an ST1 stromer, you may want to ask your dealer to show you how to change the rear tire. They should do that for you and it will you will have confidence. BTW, the ST1 is a really nice bike.

You can do it. It is manageable, but you should take your time and take the rear wheel off at home so you are familiar with things and not frustrated post flat tire. The big difference for patching/changing the rear wheel are; requires a wrench (no big deal), HEAVY rear tire (if you can...

anyone been able to install a light set (front and back) onto the stromer ST1 that utilizes the bicycle's battery? I know the City kit has lights that wire into the bike for power, but i just dont need the racks.

Yea, I rode >1000 miles on my ST1, and then got 1 flat, rear tire, big pain in the ass. The flat caused some other damage and with a different rear wheel, I got a 2nd flat. I have an REI tube in there now, but will eventually switch it over to a Schwalble tube, unless you can recommend...

I just installed one lastnight. They have some good videos online that shows you how. It took about 15-20 minutes. It would help to have someone to help adjust the pre load but it is not necessary. The Tech, Charlie, is very receptive to questions.

You need to carry around a lot of stuff for flats. You need more for equip for the rear tire, but get all the stuff and PRACTICE at home and then you wont be so intimidated. Check out this post...

Seems a little low but if your battery is new, there could be a calibration involved. I weigh a more than you and ride 25 miles/day. If I ride half the distance at Tour and half the distance at Power I finish with about 37% of charge. However no matter what I do, when I charge the battery...

I'm getting the Fluffy Dinosaur Float Version. Just ordered and the tech (very knowledgable guy) is adding the springs/elastomers to see if he can get me to float on my ST1.

BTW, seems the warranty would cover that tire.

http://www.nycewheels.com Call these folks

I have a medium ST1. I needed more room to stretch out my arms and also raise the handle bars to be more upright. I bought this part for $40 and it worked perfect for me. Ritchey, Adjustable Stem, ST Comp Adjustable 120MM/45D. On the box 31.8 is checked (I think this is the diameter of...

Went 1000 miles on a ST1 and no flats, then got 2 flats in less than 100 miles, both on the rear tire. Put together a kit and practiced removal of the rear tire so hopefully now I can address on the road. 19mm wrench to remove rear tire tire levers (optional) 5mm hex for removal front tire...

Spencer. Thank you for this "off label" use of this product in a tube. i am going to give it a try. 1. Deflate tire 2. Remove core 3. Pour in Stan's product 4. Replace core and fill tire 5. "Go" 6. ? You mention this should be repeated every few months if you use 2 ounces, but if you...

This Stan's NoTube Sealant. Do you inject to help prevent flats, or do you carry and inject if you get a flat then fill up with air? Thanks

J.R. Thanks for the video of the tube that can be installed without taking off the wheel. I will think about that. SOrry for such a basic question, but will this be a sufficient tube replacement for the stock Schwable tires on the bike or are the stock tubes more "hefty". (Link Removed - No...

I got a flat on the road and did not have the tools to take off the rear wheel. Wen I got home it was not trivial to remove the rear tire. I will practice wheel removal (front and back), Will also put together a tool kit, pump and spare tube for future rides. Is there any special...

Anyone install a Nova E3 headlight (without the City Kit)? Can you just plug it into the connector in the battery compartment (or splice)? Thanks!

That Stromer ST1 warranty is pretty good but they went above and beyond the call of duty for me. I had a simple maintenance issue that I tried to address myself. I really messed things up. I contacted Stromer in San Diego, explained what happened and asked for an appropriate dealer that could...