Search results

Wait, things are starting to get "messy". Not sure if all being on the opposite side changes anything. I would like to see someone that opened this motor already. Probably someone has a video or pictures already?

From that video doesn't look like you need to remove the freewheel, the freewheel is attached to the other cover and then the motor core is just attached by compression. So basically I could just replace the entire set all together with no special tools. I see all this from 10:20 in the video.

Ok so I'll try to open it, I read some people just needed some grease on the gears to fix the noise.

Another question, NCM said they could ship this without the case and this requires to remove spokes as well. However according to the video it doesn't look like you need to, am I right?

Hi, seems pretty easy to do probably much easier than respoking, at least for the planetary gears. They also sell the wheel entirely even though that is just a waste of materials.

I own the NCM Moscow standard edition since 2019 with 10000km on it today. A few days ago after a MTB ride at low speeds on a very steep trail it started to become more noisy, especially at high currents/low speeds (below 10km/h), it doesn't start that noisy at the begging but once you ride it a...

I replaced the pas sensor and it worked.

I'll probably use a very resistant but not permanent glue to attach a part of the string of the retaining ring to the battery case to lower the chance of it falling off. I'm not removing the battery case for sure 😅 I bought 10 for €3 so it's fine :)

I found these, they should work but cutting the other part...

Thank you I'll look into that! My plug is a DC 5.5x2.1 plug so I don't think you can find them.

I lost my rubber cap that works as some kind of protection against rain and such. I can't find it anywhere and is it possible to replace it easily? https://www.ebay.de/itm/203940468205 just the rubber part and from Europe?

Try replacing the sensor

That would probably work, can't find where I've seen a picture with 3 pins. Anyway good to know, thanks! I was looking for something more entry-level and cheaper anyway but that's all I needed to know!

Sounds pretty straight forward. Thank you!

Yes the same bike as mine in the Plus variant has Tetro HD350 brakes with the same plug but with an additional pin (and another display).

Yeah sorry wrong link, this is the one https://www.leoncycle.com.au/left-e-brake-lever Thanks, I'll try.

I'm just not that good working with wires, I never tried. Any connector with any pin number can be adapted easily with the connector I have with 2 pins? How do I know if this https://tektro.com/en/product/93 is NC or NO?

Yes, couldn't find anything there. A bunch of Julet plugs but not that one.

Hello, I would like to upgrade my NCM Moscow with hydraulic brakes but I would definitely like to keep the sensor cutoff system while hitting the left brake. The problem I'm encountering is that the display uses a (it seems) custom 2-pin Julet plug that looks like this...

Are they still working? I read a lot of reviews where people complained eventually it will leak oil.