Search results

Hi all can i hard wire into my 52v battery to power my lights and add a on/off switch without the need to use a fuse. The lights can take a voltage upto 72v. Thanks all.

Hi all, does anybody know if the S900 lcd display will work correctly with a 52v battery?. The motor is a Bafang 1000w geared hub. Thanks. Andy.

Hi all, i would if someone could tell me what is this yellow connector for, sorry about the blurry pic?. Have also sent a pic of the controller. Thanks all.

Hi All, with me being a complete and utter novice when it comes to things electrical. I bought myself a multimeter today to test the voltage of a unused thin red and thin black wire both connected a the end to a single white connecter. Do i insert the red probe into the red wire hole and black...

Hi guys, quick question. My controller has a thin red and thin black wires connected at the end with a white connector which is not connected to anything, any ideas what it might be for, i dont know the voltage but cant be too much as they are only skinny single wires on both? Been onto the...

Hi to all. Would you say that wearing a motorbike jacket is abit OTT when i comes to safety when riding an ebike on the U.K roads? I am not planning on wearing the ones with added protective plates etc, just one thats abit thicker than a normal jacket. Thanks.

Hi, would useing a 52v battery damage a 48v controller pictured here. Thanks for any input.

Hi all, my handlebar width is 650mm. Would you say that this is a good width or should i go for alonger width? Whats your take on this question. Thanks

I have a S900 display that has a 36v/48v setting, could it work if it was powered by the 52v battery. It currently has a C961 display connected to it??. The C961 is ok, but i do prefer the S900 over the C961. Which one would you choose out of the 2 of them and why? Kind regards.

Do shop bought ebikes that NOT conversions that have over 500watt rear hub motors have built in torque arms or do they still need torque arms even if they have steel dropouts? Thanks.

Do shop bought ebikes that NOT conversions that have over 500watt rear hub motors have built in torque arms or do they still need torque arms even if they have steel dropouts? Thanks.

Hi all, could someone please tell me if a torque of 130Nm is acheivable with a Bafang RM G062 1000w D hub motor powered by a 52v 17.5Ah battery? I do not know the make of the controller but it is 25amp and the display is a Bafang C961. I am 5' 10" and weigh 101kg. Thanks for your time. Andy.

Hi, what are your thoughts on the Bafang RM G03 1000watt D hub motor with a 52volt battery powering it. Any comments welcome. Thanks

Hi all, ive just purchased a new ebike, but the metal rear mudguard is not just long enough to keep the crud from going up my back, so was wondering if there are extenders to add on, but without drilling any holes in my new black mudguards, like a clip on extender?? A link would do nicely also...

Could somebody point me in the right direction of the settings for this display please, namely the P settings or C settings if it has it and how to access the settings please? Thank you

Hi all, does any body have the spec's on this direct drive hub motor please and more so the Nm it produces? Thank you. Andy.

VOLTAGE: 48V WATTS: 1000W BATTERY: 14AH SAMSUNG BATTERY,ANTI THEFT LOCK TORQUE: 95NM PEAK OUTPUT: 1500WATTS WHEEL SIZE: 26INCH FAT TYRE 4.0MM KENDA TYRES SPEED: 30MPH THROTTLE ONLY, 40MPH WITH PAS THROTTLE: TWIST THROTTLE PAS: 0-5 LEVELS OF PAS AND WALK MODE LIGHTS: FRONT LED LIGHT, REAR TAIL...

Good day to you all. Has anybody heard of KONTAX ebikes, if so are they a true company? Thanks. Andy.

Good day to you all, i wonder if you could if possible answer me afew questions, firstly would the controller of a Ecotric FAT26 work with another LCD other than the S900, and the other question is what is the P setting on the S900 to enable to ride on throttle only instead of P.A.S. Thank you...

Can the FAT26 be ridden on throttle only, with the P.A.S showing 0. If so what is the P setting on the S900 display to be able to do this please. Regards. Andy.