Search results

Veteran, have you felt the drag in the rear hub when you are not using assistance? I would like to see if the new X20 system eliminate it. My ideal rear hub motor must be running as free as a standard no motor hub. I do not know if it possible.

Agree with that MySmartBike app is not good and friendly as others, but X35 system is by far the best rear hub ecosystem today. I have more than 3000km using it and no problems at all. Just avoid the app and use a standard device like Hammerhead Karoo or Garmin .

Check if your HR sensor is paired using Ant+ or BT. There should be a link conflict.. As far as I understand PulsarOne is linked to internal Mahle controler using Ant+LEV protocol. Your HR monitor ( pulsometer) or any other sensor must be paired to PulsarOne device in order to add sensors data...

Great!! I have more than 50 ride without app problems. I like the app and the data I get at the end of my rides.

Automatic mode is to enable Level Assistance switch base on Heart Rate. Avoid that, turn it off . Many problems reported when is ON

Veteran, Nice to see you recorded a complete ride. I came to the conclusion that once the application is running and I have put the phone in my pocket, I should not touch it at all until the end of the tour. I use small Orbea( like PulsarOne) device for Level assistances switching, I never use...

Hi Veteran, I follow same with 2 additional steps: _ close any app running in the phone _turn off screen before putting phone at pocket

Hi Veteran, Let me understand your settings. First, I want to know if you are using a display device ( somenthing like the attached). What do you use to change assistance level ?

Hi Plan Bee, There has to be a way to sense the pedaling to activate the motor when the assist is on. What I can't say is if the internal RPM reading (not the rider's cadence) is part of the motor control algorithm (probably it is). The truth is that when you use the assistance and you reach...

I use an Android phone but it must be the same. 1) I turn on the system on the E Bike 2) I logged in the Mahle app 3-I link the Ebike with the Mahle app by pressing the upper red circle in the app 4) Once linked (the circle is now green), I run the app by pressing the lower circle. 5) Once the...

By the way, does anyone know if this automatic shutdown can be removed?

Something similar happened to me once. In the middle of the tour I stop to take some photos and have a coffee. After a few minutes the ebike turned off the assistance system, then when I continued with the trip I did not realize that I had to activate the app again. When I got home I only had a...

hi ngg, Thanks for your comments. Maybe I wasn't clear enough, but let me say that battery extender should be considered only in very particular cases. In no way am I proposing that the extender is necessary for everyone, nor that it should always be installed on the bike. It is an implement...

Battery Extender Continuing with the experiences and learning of the Orbea Gain D50, I have come to the conclusion that it will not be bad to have a battery extension system. We have optimized the administration of the energy available in the main battery to the maximum, we have gotten...

Hi Jaja, I have developed and proposed a methodology for a better estimation of assistance levels based on real parameters of each cyclist. I leave the link in case it can be useful to you. Orbea Gain D50 ( User learning and experiences )...

L1 at 100% = 100 W L2 at 100% = 175 W L3 at 100% = 250 W Knowing that, you can customize your assistance levels.

ngg, My God, now you has left me a great thing to think about...!!

Hi ngg, 1. Not single plate. It is dual 50/34 Compact 2. Yes, I did some notes. I'll put in better presentation and share them.

This week I have dedicated myself to mechanics. I decided to change the entire Shimano Claris R2000 group set for the Shimano 105 R7000, I have also changed the stock rims and tires for some DTSwissR460 with Continental GT5000 tires. The seat tube was changed to a Thomson Masterpiece and the...

Recommendations to optimize battery performance: 1) Pay attention to the type of tires you are using. Rolling resistance, pressure, tire width, with tube or tubeless.. According to the ngg case study, a significant saving in battery charge was obtained with a simple change of tires. All your...