Search results

BB Have you seen these reducers, they can take a 31.8mm Hbar clamp down to 25.4mm diameter, and with an adjustable stem you can get just about and angle/height needed to fit you. I use the adjustable stems to get good Hbar angles on all my bikes...

BB What is your bikes handlebar clamp size? What is the handle bar clamp size of the cruiser bars? Tia.

Art Deco Anything more to add since the build? I have this Montague folder and still researching which way to go, I know that it will be a DM02 motor, T154 display, 48V battery's ( I have 6 of them, for both of the other bikes Warthog/Juggs 4). Just not sure where to add the battery under the...

The old time Honda type of handlebar lock, turn 90* and lock with a key, and with disc brake locks front and back, a standard paddle lock locked around the top/bottom chain behind the crank and before the derailleur, kill switch for the battery. Just used for temporary quick stops/grab a quick...

This looks interesting for a dual option bell, https://www.amazon.com/TIMBER-Mountain-Bike-Bell-Multi-use/dp/B0C26BFWQD/ref=asc_df_B0C26BFWQD At least you can shut it off, when not needed. ymmv

And put FLAT OUT in everything, unless you like fixing/patching flats.. It will save you headaches down the road. ymmv

I was given one of these, converted it to lift my 100# e bikes, made a 48" longer straight arm (oem curved down too much), seems too work very well and I can rotate either bike to work on the other side if need. Plus, when I crash and burn again, the better half can lift me in and out of areas I...

I do believe that those are car hauler cars, if you get the right angle you can see the cars inside. I got to look inside one, when it stopped while waiting for another train to pass. ymmv

Always........I have to wait till around 10 o clock, to find the possibly true direction it want's to go......... then it's a 90% chance it's be wrong. ymmv

I don't any more, since I made adapter cable that fits both of E bikes and battery's and this adaptor works for either bike or all 6 battery's, never used more than 2 battery's for 80 >100 miles per charge, so far. ymmv

Ped I did and failed according to them, even thou I had the same correct answers that they showed as correct, but NOT correct they said. I don't know what is going on....

BB Try this site, you can pull up an image of a HB shape, then choose another to superimpose over the first one, if you don't like the choice choose another, the built in scale will help with the measurements: https://whatbars.com/ It helped me find the H B I wanted. ymmv Tia

Get a mechanics rolling seat an adapt it to fit, the bike carrier, a kids skateboard would work also. You can buy a 6' folding ramp that works perfectly and also fits the bike carrier....https://www.amazon.com/gardhom-Folding-Motorcycle-Aluminum-Capacity/dp/B0DRCKFWKS/ref=sr_1_16? ymmv

Why not get the same type of carrier that you have now, only in 2 place, they come in Alum and steel, also get the type that has 1/2" bolts to make wheel pockets for the bikes, and use a 4' NO Hook ratchet straps around the wheels and carrier, for added safety, I have used mine for 4+yrs in...

Ped Do you have a site that explains your Paraffin waxing method, Would this be the best method for a HIGHLY MINERALIZED dirt/dust riding conditions? Tia, Don

6zfshdb It looks like a 5 pin Hailong plug with a pos and neg wire, attached to each outside pin. The female side is in the battery and I am afraid of messing with that part. I don't know how to post photo's here, Sorry.

I took apart my 5 pin battery base on my Biktrix Juggs 4 bike, (battery slides into and locks the battery to the bike), I found these numbers molded into the battery discharge parts, Retention??<(hard to read), PLA-2099 and PLA-2049. I used the above numbers and failed to find any information...

Caspan Thank you for those measurements. From the measurement photo #1 (L >R), this is the way I measured my plug and got a reading of .750" outside to outside. Your plug measurements, .857" - .750" (my plug measurements) = .107 difference to wide. Your plug is .107" too wide to fit my...

Mr Caspan When you get your battery plugs, Can you please let us know what the outside to outside distance if the flat blade pins are, on that brand/type of plug. Thanks,

6zfshdb What kind of epoxy did you use to build your plugs, I am tired of attempting to find the correct spacing plugs to fit all my battery's. I'll machine out a holder for the correct spacing and fit the proper/correct pin to it, then use epoxy to make the plug. I have to make 2 different...