Search results

  1. GMA52

    Rear Wheel Removal Tip

    When I first got the bike they were a 14lbs of air pressure. I found the bike got much more stable at or near 20. I do not like doing anything at or near it’s maximum as it wears it out quicker. A circuit breaker in a house should only be operated at no more than 80% of it’s rated value. I...
  2. GMA52

    Rear Wheel Removal Tip

    With the knobby tires I had the pressure set to about 20psi. With the new Kenda’s 21psi. Why the difference? Mainly to insure they straightened out. I originally filled the rear to 25psi to correct any issues with tire deforming during shipping but dropped to 21psi before riding. Didn’t need to...
  3. GMA52

    Rear Wheel Removal Tip

    You guys have been a big help to me and it is appreciated. Thank you
  4. GMA52

    Rear Wheel Removal Tip

    My does it in .5 increments. (i .e. 27, 27.5, 28, 28.5 and the low value is 14“ and high value of 30”). I assume that is what you mean by granular but really granular would be in .1 increments.
  5. GMA52

    Rear Wheel Removal Tip

    Yes, it was right on with their setting of 29” wheel setting. Now I had to go to 27” wheel setting and now close to the Garmin. I am so tired I cannot rationalize the setting going lower with new tires as to why? Maybe tomorrow after I get some rest my brain with revert from it’s present Jelly...
  6. GMA52

    Rear Wheel Removal Tip

    Thanks PCeBiker. That certainly clears things up a bit :) Also, I only charged to 49 volt DC because it was getting dark and I wanted to test ride it. Probably should have waited unit full charge.
  7. GMA52

    Rear Wheel Removal Tip

    Great suggestion. Thanks. Maybe because it is cold out there this evening but with a fully charged battery an PAS level of 5 in 8th gear I was getting 28-30mph with not problem but this evening 25 was all I could do with PAS 5, 8th gear and slightly downhill (the garman and the bikes display are...
  8. GMA52

    Rear Wheel Removal Tip

    I understand diameter and circumference but sketchy on actual wheel diameter and outer tire diameter as to which one the are setting wheel size on the display for the wheel size. I do not understand using 26” as wheel size if the diameter of the tire is larger. That affects the speed just as it...
  9. GMA52

    Rear Wheel Removal Tip

    I had to re-adjust the tire size to 27 get it close to the Garmin after charging the battery. I thought the diameter was of the peak point of the tire to opposite peak point of the tire. I do not understand how they all have a 29” diameter. Please educate me :)
  10. GMA52

    Rear Wheel Removal Tip

    LOL, You will not believe this but I only got 1 hour or so sleep last night but wanted to stay awake all day to do things on my E-Bike and start on a Battery monitor circuit that will read out all important data for the battery. Any way I nodded off to sleep several times writing the previous...
  11. GMA52

    Rear Wheel Removal Tip

    Ok, two things…first the display has two graphs, one for remaining battery voltage and the other is for PAS level. I apparently looked at the PAS level and it was 3/4 full and I was thinking it was the battery voltage. The battery voltage was at the lowest level and the E-Bike barely made it up...
  12. GMA52

    Rear Wheel Removal Tip

    Photos below of my Kenda Tires and E-Bike Kenda Tires on my E-Bike
  13. GMA52

    Rear Wheel Removal Tip

    These tires do come to a more rounded point than the knobby’s that are more flat across so who knows. I can adjust for that in advanced settings so that will be my next project :) I went off into sand in one spot as I always do due to the extreme 90 degree curve around a tree. I just cut across...
  14. GMA52

    Rear Wheel Removal Tip

    Ok, both are on. I had to remove the derailleur to get the rear wheel back on (as the axil sticks past the derailleur by over an inch (unless I removed the disc on the opposite side) and when I did the special nut shot off into oblivion so ordered more from Amazon. They came in late last night...
  15. GMA52

    Rear Wheel Removal Tip

    Ok, I got the front tire replaced with the Kenda Cursor. That was a much better experience this time. I did like I did when I put the stock tire back on after that disaster of a tire attempt by having the tube inside and lightly inflated. I used a hair drier to soften the rubber and sprayed the...
  16. GMA52

    Rear Wheel Removal Tip

    Yes, I am good at that-😳😂 signed, Gimpy
  17. GMA52

    Rear Wheel Removal Tip

    Here is a funny or not so funny one depending on how you look at it. My wife asked me (just before she left) “are you doing something with your bike? I see it is upside down. I said I am changing the tires. I thought you saw the tires when you went into the room then ask me to please clean it...
  18. GMA52

    Rear Wheel Removal Tip

    Cat is out of the bag. Wife went into the middle bedroom. All she said was please clean it up and nothing about the tires. I guess she figured that was fruitless.
  19. GMA52

    Rear Wheel Removal Tip

    Ich habe keine Ahnung, wovon du redest PedalUma
  20. GMA52

    Rear Wheel Removal Tip

    Okey Dokey, won’t touch that with a 50 ft pole. Even if I could lift a 50 ft pole 😂
Back