Search results

Schwalbe Nobby Nic's, and Maxxis Minion DHR

I'm dying to hear if this is the issue. :)

Sounds like the contorller is just not reporting the amps and watts ot the display? Or teh display is not reading it? But the bike runs fine?

I did a deep dive on Rohloff before I installed the Rohloff on my eMTB. Searched many a forums and determined that the electronic shift version is plagued with problems. Many unhappy owners. I installed the manual shift version and could not be happier. Riding vary hard for 14 months almost...

Are you using a UART display?

"Or could it be that all these problems (completely warped wheel and broken spoke) happened because I had the seatpost changed, and this is not the original configuration?" The temptation is oh so strong with this one :p

Thanks! Yeah Rohloff hubs have been available on Amazon for a while. Understand, I do not believe these are hubs and parts are being sold by Rohloff authorized distributors or service/sales centers. https://www.rohloff.de/en/company/worldwide

Welcome to the Forum.

I had issues too with adjustments. Very finicky. I had minor damage too many times on rocks, roots, etc. Then it was too finicky to adjust after tiny mishaps. I finally ditched the whole dearailleur thing and installed the Rohloff 14 Speed IGH. Man it is heaven on an eMTB! I would never go back...

How many teeth on your front chain ring? How many on the rear? Just curious.

CAN version you are out of luck as far as programming is concerned. I honestly don't believe you have a lack of "power" problem. I have the same motor and Rohloff hub. My bike will will climb any hill at speed, for a long duration without overexertion. You may have some other problem. Have you...

Volts X Amps = Watts 52 * X = 2200 X = 42.3 You will need to install a controller rated at 42+ nominal amps. Don't do it. If your motor is UART, get a cable and program the torque settings. @smorgasbord has a whole thread on it.

I've got a BBSHD too, on a Fat Tire Bike. You do realize that you are going to have to work harder with the ULTRA becuase it's torque sensing and there is "no free lunch". The BBSHD has cadence sensing which is going to power you up to speed whether you are pedaling hard or easy. BBSHD is a lot...

I have the same motor and Rohloff hub. 30 Amp controller, 48V battery. I cannot imagine having any problem climbing long and steep grades. Something else must be amiss. What is your transmission ratio (Chainring Teeth/ Rear Sprocket Teeth)? I was running 2.5 which had ridiculous climbing...

It's good to have in your quiver of tools.

And local bike stores. I saw a lot of shady stores in NYC selling refurbished sketchy batteries.

Yes. It woud involve upgrading your controller (40amps+ nominal), and a new battery as your battery will need to have a BMS (40amps nominal) with a higher amperage output, and you'll need higher voltage 52V-60V. You'll probably want more Amp Hours too as you will obviously burn more energy on...

Initially, it sounds like your rotor is bent, or your brake mechanism is not alighned properly. I found this kit to be invaluable for setting up my brakes, and straightening a bent rotor. Stainless Steel Bicycle Disc Brake Wrench Rotor Alignment Truing Tool Repair Kit，Disc Brake Pad Adjustment...

Looks like commercial etsablishemnts may not sell rebuilt or reconditioned batteries that do not meet the legislative standard.

Pretty comprehensive. It also covers all those jinky bike stores that "assemble, recondition, sell or offer for sale, lease, or rent a lithium-ion battery or a second-use lithium-ion battery". The cost for batteries for all those ebike delivery guys in NYC just doubled, or tipled.