Search results

I wonder if the compatible Magura pads are any wider to compensate for the reduced height. When I got my 203mm Centerline rotors and noticed the shorter outer pad contact surface, I was concerned that the inner portion of the pads would wear differently than the rest of the pads, because they...

I originally bought the refillable Eco Blast horn from the boating supply section of a hardware store. You simply pumped it up with a bike air pump via schrader valve to 100psi. The button/actuator broke after many years of use, so I added some fittings to connect it to a male air compressor...

If you check Maguras website regarding their MT 2 piston calipers, they use the 7P brake pads, which are considered narrow type pads, they are not the same as your Shimano B05S brake pads that fit your BR-MT410 calipers. I wish these manufacturers' websites would list more dimensions than simply...

I was looking at upgrading to 203mm 2 piece rotors, but I thought they were all designed for 4 piston calipers with the narrow style brake pads. Most of the ones I looked at said the 2 piston calipers with the wide style brake pads weren't compatible due to clearance between the caliper and the...

I was thinking of getting the P20.11 pads, I figured the E10.11 will at least be an improvement over the OEM A10.11 pads that my bike came with. Are the P20.11 quiet, no squealing like some sintered metallic pads.

I received the Tektro TR203-52 rotors and E10.11 pads, the outer rotor brake pad contact area is approx. 17mm vs the SRAM Centerline RT-CLN-A1 203mm rotors which were 13.5mm. In the pics, the brake pads align with the contact patch on the Tektro rotors, you can see the brake pad overlap on the...

I moved to Trail in 98, grew up in Regina, Sask

Will do, thanks for the heads-up. I don't want to cause any problems, just anxious to share what I've learnt as a new e-bike owner.

Do you realize that I'm still sharing useful information that someone may see, regardless whether or not the original poster sees my response.

I ran out of recent posts to reply to, got bored, I'll stop replying to anything older than a few months.

What is a safe time frame to reply within. 1 month?

Sorry about that, I just recently joined the forum and I was bored last night. I know I'm late to many conversations, but I still want to share any info I have.

That's what I figured was the correct brake pad to rotor mating surface, as far towards the outer edge of the rotor for the most potential braking force.

Looks like something to add to my wish list, thanks.

Definitely nice if you have a standard transmission, I use my clutch more than my brakes on my car.

I wasn't able to upload the pic of the paintball cylinder attached to the horn. The pic I posted is an EcoBlast horn meant for boating, it was filled with air via a bike pump schrader valve to 100psi. (valve is broken now, hence the CO2 mod) I used it when hiking in the back country to warn...

I'm late to the conversation. If you have brake cut off sensors, there's usually some adjustment between the lever and the sensor. On my bike, I had the same problem, so I turned the brake sensor nut clockwise to move it closer to the brake lever. If that doesn't help, you should have a brake...

I was contemplating adding a paintball CO2 cylinder air horn, but it's too damn loud.

I'm curious how your brake pads are aligned with the outer edge of your rotors. Are the front and rear pads closer to the outer edges of the rotors? My OEM 180mm rotors contact area is approx 17.25mm and the Tektro A10.11 pads contact area height is 16mm. With the 180mm rotors, the front and...

Which Kryptonite lock do you have? Is it a chain lock or u-lock? The Kryptonite Evolution LS u-lock has a similar diameter shackle as my Abus Granit XPlus 540 230mm u-lock. Which has the Eazy KF mount attached to the 14mm square tubular shackle, approximately 60mm long. Take a look on the Abus...