Search results

  1. MrCaspan

    Part for Battery

  2. MrCaspan

    Part for Battery

    And I have no clue if this happened over time or if it all happened at once. I am assuming it was over time. It is a 1000w mid drive so it does pull a lot of juice. This also makes me realize it is probably a good reason to take the battery off once in a while and clean the contacts off.
  3. MrCaspan

    Part for Battery

    No clue, I am guessing there was junk in the port that caused a small disconnect. I didn't take my battery off all summer so it's possible very small arcs were happening just built up heat over time over and over. Not sure how else it could have melted unless there was too much current was...
  4. MrCaspan

    Part for Battery

    Okay I took my measurements at the bottom of the pins as the top of the pins have some movement This is the male part that is on my bike that I just got from Biktrix so the female on the battery part measurements I ordered should be close to this but ill give measurements for this when I get it...
  5. MrCaspan

    Part for Battery

    100% I have a digital caliper and I'll return with details once I get it!
  6. MrCaspan

    Part for Battery

    You can have a battery not fully insert and stay on the bike? All of my batteries are designed so they require to be all the way in to lock or remove the key.. there is no such thing as half in or half out or else they would fall out. What kind of battery allows you to half insert?
  7. MrCaspan

    Part for Battery

    A wire toothbrush just to knock off all that carbon I feel would work well, but a fine file should not hurt.. But yes, if you have to put your back into the stroke then you are going to create a different issue :) Contact cleaner would not hurt either from WD-40
  8. MrCaspan

    Part for Battery

    This is actually really great feedback because every time you transport your e-bike you're supposed to take the battery off and then you get dust and build up all over the terminals and like you said any bit of dirt in there will create resistance which will create heat and it'll just compound...
  9. MrCaspan

    Part for Battery

    Took the caliper and this is a perfect fit for my battery. I have the Juggernaut FS 2 so for anyone else looking this is an exact match. Its coming from China so well see it in 2 weeks!
  10. MrCaspan

    Part for Battery

    Yeah was going to check tonight with my calipers to make sure. It's a perfect fit for that block so it will need to be right on! Yes all the terminals are gloved (finger condoms) and taped with electrical.. Last thing I need is a battery that big and a runaway discharge!
  11. MrCaspan

    Part for Battery

    Forgot about that crap.. well we will see! still cheaper than I $700 USD battery!
  12. MrCaspan

    Part for Battery

    My local bike shop came through and found me this! https://www.greenbikekit.com/ebike-battery/battery-parts-case-key-locks-mounting-bases/syr-in-tube-battery-connector-4-pins.html This looks like the correct part!
  13. MrCaspan

    Part for Battery

    Hey Guys, brought my Fat bike battery out of storage and plugged it into the bike and got nothing. I looked at the battery end and saw that one of the battery ports was a little melted. I am assuming this happened last year as I only charged the battery pack on the bike and when I removed the...
  14. MrCaspan

    Biktrix Juggernaut Ultra FS Pro 2 1000w, Mid Drive, Fat Tire e-bike, 19" frame $3200 CDN

    Here is my ad on Kijiji. If anything is missing please message me privately I'm in Ontario near Toronto!! https://www.kijiji.ca/v-view-details.html?adId=1676590594
  15. MrCaspan

    Brighter Headlight using existing wiring?

    Yeah that's a great idea to be honest. I have a couple of OLight (800 lumen I think) for my helmet and handle bars but I get sick of worrying about "did a charge the battery", "over the winter how do i store them", "did keeping them plugged in kill the battery now". I have a 900W 48v battery on...
  16. MrCaspan

    Brighter Headlight using existing wiring?

    Awesome Video! Thanks! This assumes your controller is powerful enough to support 2 lights. I do think that I like the idea of pulling directly form the battery so I get as many amps as I want (relatively speaking) I would use the existing light wire as a relay trigger to open the relay and let...
  17. MrCaspan

    Extreme 3.0 at The Hydrocut

    Ill be the guy there 100% exhausted on my manual bike because I have been so spoiled by my ebike ;) See you on the trial!
  18. MrCaspan

    Extreme 3.0 at The Hydrocut

    I took 30 seconds to go into a Burger King to pick up an order and as I was at the counter they picked it up and biked away with it. I thought because I could see it that it was safe.. I didnt have a lock with be me because a few days before I was at the Halloween Hydro Cut thing and I was...
  19. MrCaspan

    Extreme 3.0 at The Hydrocut

    Haha I remember you. I have my bike there and you started in on "You ebike people dont earn your rides..." I was with a friend that was like WTF man!! Then you pull out your Monte Capro form behind the poles and I knew what it was right away but my friend was like "He's coming over here" awm...
  20. MrCaspan

    Extreme 3.0 at The Hydrocut

    Honestly i had no issues at all with that bike in there on either side of the Hydro Cut. My old bike got stolen so i bought a dedicated mountain bike for the Hydro Cut I got a Trek Fuel EX5. And now I replace the old bike with a Volt Enduro 2022 model. just for commuting to work!
Back