Search results

yes

Yes, I found those bars to be less comfortable than most I've tried. Just personal preference.

My 2019 Evo Expert with Di2 came with the standard normal Di2 shifters for both left and right. Of course the left one was not hooked into the Di2 system as there is no front derailleur and no need for the electronic connection, just the hydro brake connection. On the other hand the wire from...

Holes in seat tube? Don't think they're "holes." Think they are slits in the tube that show under the clamp that enable the tube to clamp around your seatpost when the bolt is tightened. No? Any bike that uses a seatpost clamp has to have a tube with some sort of void in order to tighten around...

You only live once. The Creo is a state of the art machine. Think about the extra $$$ to buy the Expert amortized over a year or two. It won't hurt that bad and you won't have to think about carbon wheel upgrade every time you ride with people who already have them. The combination of a...

No big deal really cuz pretty easy to reposition if things need to moved around. Enjoy the ride.

nice install. hope that position works for you cuz it looks really uncomfortable to me.

I have a Turbo Creo Expert Evo with Praxis cranks. I replaced my original crank arms with shorter ones. My crank arms came off with one large hex key. The bolts are self extracting and are torqued on good so require a good wrench and maybe a cheater bar too. But all I had to do is loosen the...

Hello Prairie, Just wondering did you run both remote wires through a single exit port or one out the drive side and one out the non-drive side? Mine both come out of my empty drive side port. Port was empty as I removed the dropper post cable when I installed standard seat post.

I could get one plug end through the big hole but when it was in there its wire took up space in the hole which made it seem impossible to squeeze the other plug through the hole. And the small hole was definitely too small. No big deal since it all worked out. If you are going to use heat...

I installed my set of Creo remote buttons today. I am not trying to be a downer but I think they are nearly as small and fiddly as the ones on the top tube TCU. And the install was some kind of hassle too. On my Creo Expert Evo I have removed the dropper post so the drive side port was vacant. I...

Wondering about how your wrapped the tape? It looks like you may have put a hole in the tape so the button would show through but still be really secure surrounded by the bar tape. Details pleae.

Mikes Bikes in Petaluma, CA emailed me and said my remote button order is now in stock.

Was the battery just sitting there or was it in holder or wrapped in foam...or what?

I just ordered the exact parts you said you used. was this as simple as removing the TCU from the top tube, threading the remote cable through the hole in the frame, connecting to the spare lead coming out of the TCU, and them mounting the button thingy to the handlebar extension? is the...

I own a 2020 Creo SL Expert Evo. The one with Di2 and carbon wheels and Ultegra. Make sure you're sure you like GRX shifters. The GRX Di2 shifters have a really tall bump on the top front of the hoods. I found that bump to be really constraining when riding in the hoods. Granted the Ultegras...

When you do this fine DIY remote project does the the DI2 shifter need to be connected to the DI2 battery? Or does the FSR cable provide the required power from the Creo battery?

The end product in this DIY approach is best solution I've seen so far for those of us who have that DI2 lever there. Way more elegant and simple than wiring the yet to be available Specialized Remote Buttons. But...even though I bet I could handle this project I'd be concerned one false move...