Search results

Changing the Delta Voltage table will change when max pressure is detected at any speed. Changing the SPDxx values will change when max pressure is detected at the speeds covered by the columns in which you change it. It's easier for humans to control pedal pressure at low pedal cadences than...

In the Quick-Start post look for the rightmost column of Delta Voltage values

Note that the Quick-Start is a starting point. Depending on your bike, your fitness, and how you ride you should think about what is working well and what isn't. For instance, it looks like between the 38T front chainring and knobby tires that you've set your bike up for off-roading. So I...

It's probably your KeepCur(%) values, which have to be at least as high as MinCur(%). Try setting each column's KeepCur(%) to that column's MinCur(%) and try again.

Again, make sure you're doing a Write yourself after you've made changes. Do you know how this "special software" is setting the 45kph speed limit? Do you see the "45" listed anywhere on the Pedal tab or Basic tab? Presumably, it's not in the display, since I don't believe Frey ships with...

OK, here's something new to check/try: On the EggRider's Display tab, there's a setting called "Bafang Switch Mode." That can be set to "Only Live Data" or "Live Data and Settings." Here's an excerpt from the manual: Make sure you have "LIVE DATA AND SETTINGS" selected. If you have "ONLY LIVE...

For the first effect, it sounds like you might be missing a configuration setting. Here's what you need to do: 1) On the Basic tab: Set Speed Meter Signal to 2 even though you have only 1 magnet 2) On the Basic tab: Set the "Wheel Diameter" to the value that's closest to your actual tire...

I’ve had nothing but friendly chats with analog road bike riders that I’ve encountered. And often waves from those traveling in the opposite direction.

1907?

Found this article on SRAM's GX vs X01 chains: https://mbaction.com/ask-mba-is-srams-x01-chain-worth-the-extra-money-compared-to-gx/

I looked at 3 of our tires and couldn't find anything that looks like a date. This marking appears to be in the same location as your date: All 3 tires have the same marking. Anyway, since the new JWs aren't made in the size I want, I'm going to order these since while the ones we have will...

I've been running the X01 chains on mine and my wife's Ultra/GX setup. Last time I checked we have over 2,000 miles and hardly any measurable wear, using a Starrett digital caliper.

It's not yet 4 years old. The website/company got bought and the new company didn't migrate all the content over. Here's a summary article that's still live: https://www.pinkbike.com/news/4-key-facts-from-the-cycling-tips-ultimate-chain-test.html Here's another more recent article...

I found them for $65 shipped. How long do tires last in storage?

The Eddy Currents look good if I was exclusively off road, but my riding is a mix of pavement and trails and I like the smooth running of the Johnny Watts.

I have the 27.5 x 2.8 original JWs. They've been great, but it looks like that size isn't offered in the newer version. I really want that extra width. I did find one source for the originals, but at $100 a pop I'm hoping for something better priced. I won't need new tires until next summer is...

BBSHD has a torque sensor?

They're Deore so they'll work perfectly. Actually, pretty much any Shimano lever will "work" with any caliper since the outside hose diameters are the same (5mm), and that's that the olive attaches to. Some levers/calipers were designed for the smaller inside diameter hose, some for the...

As a result of an off-board discussion, here is some additional information that might help you grok the Delta Voltage table. It's a different enough way to think about it that did some edits to the first and tenth post in this thread. While the table is laid out such that the input is pedal...

FWIW, I believe Parallels works well on the ARM-based Macs for Windows emulation. I personally still have the last Intel-based MBP on which Parallels works perfectly - I have two Windows only apps that use COM/USB ports to connect to hardware and assignment/use is quite straightforward.