Search results

New handle bar and grips for the SL's. After a lot of km we came to conclusion that 16 degrees and Ergon grips fitted our needs better for our fit. Happy with this fit.

https://en.m.wikipedia.org/wiki/The_Indian_Water_Lilies 😉

Replace inner and outer cables and open up the shifters Ok video hoe to work on those shifters

https://www.volabike.com/en/specialized/33-kit-extender-para-specialized-turbo-levo-sl-kenevo-sl-creo-sl-y-vado-sl-bag.html#/31-logo_color-yellow/38-capacity-240wh/65-version_de_motor-motor_sl_11 vola bike has a 480wh RE for this system

Both the Lupine and the Luminite are available as a seatpost mounted version, so those could could be mounted below the saddle bag

I'd say Lupine C14 light, or the new luminite. I do think you would need to make your owm backet if you wanted it to be mounted underneath the saddle or use a plastic bridge to clamp it onto the saddle rails B&M EAN 4006021010550

the EN norm for this type of bikes states

depends on the model. for the ones without a locking ring, we used to use hairfixationspray to put them onto the handle bars and when this is dried it will lock on the grip. In the case you would need to take them off, spray discbrakecleaner underneath the grips and use a compressor to shoot...

That would also work on your bike. I've been carrying a variety of jackets in my deuter bladder holder, most leight jackets should fit i think. My current mammyt drylite hard shell weighs 190 grams and fits almost anywhere, same for my endura windbraker ay 115 grams

either the seatpost needs some more anti seize or carbon paste in the seat tube or the saddle needs to be re-mounted. thats the first one to check. than if the creaking is still there, the seattube will swing a bit, so if you have something bolted on to that that can creak (doubt it with this...

Does the creaking also happen when you are out of the saddle? Same for the handlebar, does the creaking stop when you are barely touching the handlebar? And did you pul the pedals of an re-attache them with anti-seize paste on them?

5 till 8 sp is compatible. so that should not be an issue

Could not find an English site with this product, it should be somehwere on the internet. https://www.buzaglo.nl/nl/mirage-crankverkorter-zwart-t6-met-rvs-bouten-zwart/a17924 you could alternatively use those to "shorten" the cranks. found one source in English...

there are options to runs electronics from the bdu, for BES2 you are limited to the frontlight powerport. For your bike this would be setup for 12 volt 3 watt. At least that is what I read in the containerfile for this model. Usually the dealer (you if you haveaccess to the service portal) to...

Did not read the other comment. I do know that a few bigger brands in E-bikes use Bafang motors and drive-units with either their own badge or Bagang branded. Also know that a former brand I worked for switched from Mahle to Bafang for a few model line ups because the service center in the...

Just had the pleasure to do a testride with such a mevice hub motor. Rides just fine, pickup is responsive

looks good for that price point indeed

Slane Cycles has a C'dale for that price with a Bafang hub-drive. could not find any other bikeshop in Belfast and surrounding with stock of e-bikes in this price range.

A hollowtech central tool? Arent those with the cupwrench? I got a few and they were part of the tool set, do cup wrench and plastic tools for the central bolt. The first few i ran into in my home office I think the Shimano part was tlfc16 or in that range. My brain....

There are a few brands with extreme mountainbikes which have inflatable downtubes to give these bikes more body, so helium filled roadbikes...