Search results

I have not bought the programing cable and am still using the built in interface which gives you access to speed limits per mode etc.

The new software is fine? I read somewhere about using a phone to upgrade instead of a PC and cable, but I don't know if that is really a thing yet.

Being able to have a longer trailing assist would be useful at times.. Maybe an on the fly push button for getting through tight rocks where pedals strike?

Great post. I have always followed the old motorcycle mechanic method of checking the chain pull away from the rear sprocket. Any link lifting from the largest sprocket indicates that the chain is too stretched and will begin rapid wear to the teeth of the sprockets. As soon as I see...

Great info.. Thanks for the post.

I need to buy one of these kits for my bike and my sons.. and the lower shock bearing for all 3 of ours. Great info.. Thanks for the post!

Air inversion layer- dark and foggy in the valley's and beautiful sunshine above 3500' I rode my TwoSeven powered bike to the top, because it has not been used in a couple of months. My Yamaha Moro 07 has been getting all the rides. Observations: 1) The DM01 is WAY overpowered for this...

I put a touch of grease under the bolt head and left the washer to caliper dry. Without it, every time I tightened the bolts, the caliper moved slightly. Locktight on the bolts too.

Agree- I had to adjust front and rear calipers. I just installed my first replacement rear pads.. They do not last for very long when doing big downhills.

I bought and installed a set of Raceface Chester Pedals too.

Overlooking Grants Pass / Rogue Valley from a recent clear cut.

Dang... We would have done this ride. I will look for it next year. Thanks for the heads up!

I will buy a microshift solid rear cassette..

I have a 1x11 Sram on a DM01 at 60v, but installed an ebike rated chain on it and a shift sensor. The drivetrain is holding up well for all but my cassette, which has loosening rivets. (soon to be replaced with a solid unit) I think I damaged the cassette by riding the bike when it was first...

I put the same pedals on mine.

The seat is "wearing on me" over time! 😄

I have put a few miles in on my new bike now and am now looking to add a few changes for my uses. I am adding / changing: 1) Deity 30mm x 80mm lift bars for my taller body. https://www.jensonusa.com/Deity-Highside-OS-35-80mm-Rise-Handlebar 2) Front and rear fenders for the winter. I...

I posted this review after putting about 100 miles on the bikes: https://forums.electricbikereview.com/threads/3-new-04-yamaha-ydx-moro-07-special-editions.56771/

We were skeptical too... so far so good!

I picked all 3 of them up and my friends also picked up all of theirs. $1699.00 total with $25 fee ea! I wanted to buy them in the box and assemble them myself, but that was a no-go for warranty I was told.