Search results

G510 motor correct? Here's one but their pricey! Make your own it's easy.

First thing I would do since you got it apart already is check the #12 cell group to see if maybe one of the four batteries in that group maybe became disconnected. On an old Luna Shark pack I had I opened up and had 3 sensing wires broken off and 1 battery connection broken because the...

Lots of good info to be sure. So it's showing a problem with the #1 cell group correct? Voltage reading is 3.477v similar to the other groups except for #12. So why the red color? Did you open up the battery and isolate the individual cells of that group and load test them? If sensing wire came...

Whats the need for the smart BMS? As long as the device does what it's supposed to.

Found this just for a quick reference.

Deacon Blues : In my experience on using different displays the battery status or % reading was never correct. I always change it to an actual voltage display. It gives me a much better snapshot of what amount of power I have left and if I need to conserve or not. Like stated above 58.8v at...

KMC is a quality chain. I use the E11 and haven't had any issues.

When you first connect up your USB cable to your motor you it should load up the program grid. You will have to select "Read" on the screen to see your existing settings of your motor. BEFORE CHANGING ANYTHING WRITE DOWN ALL YOUR EXISTING SETTINGS SO IF SOMETHING GETS OUT OF WHACK YOU CAN...

Sold.

Yeah it looks like 52v 14ahr, bummer.

Spoiler alert! My Surly had horizontal dropouts too but the torque of the motor would make the axle slip under load and move forward and then your chain will loose tension and it will skip. I know all about sliding the wheel forward, setting the chain and then sliding it back and then tighten I...

Whats nice about the SA 3 spd is the parts are pretty cheap to rebuild or repair if you need to. I think the rear cogs are like 8 bucks or so. They are easy to open up and work on if you need to. I think Modern bike and universal cycles carry all the spare parts. I think the whole rear hub is...

As far as swapping motors just make sure you get the same size bottom bracket size. To program it down you will need the usb cable and you can download the software online pretty easy. The BBS02 is maxed out at 25a and BBSHD will go to 30a but it's more robust and has more heat efficient mosfets...

My guess is there using a 14s 5p configuration and probably the Samsung or LG batteries rated 3.45mah or 3.5mah. Color will usually tell you which manuf the batteries are to.

Another thing to consider when going with a shorter crank arm is your seat height will probably need to be raised up as a result of your pedal stroke not being as full. Food for thought.

Im gonna say that even the 165mm cranks are to long for a full travel bike, I don't think a DH bike really matters as there not really pedaling much at all. My bike motor I got from WW came with the Miranda 170's right out of the box and I think I gave it 2 -3 rides before nixing that noise. The...

Pushkar told me when I purchased my motor and controller combo that if I was using the 750C it was going to be all sport level assist and no "Eco" which was fine by me. When your using the 10 levels with the DPC18 for example ; Levels 1 - 5 = Eco mode Levels 6 - 10 = Sport mode Going by the...

I have an old Park PCS-1 stand that I cut down to use at a lower height. When clamping all I do is lift with my back arm elbow at 90 degree and lift the bike at the back of the seat align up and close clamp. No need to lift bike or anything. Front wheel rests on ground and rear tire is 6" off...

Funny as it sounds derailerhanger.com is legit. They can make copies of what you need. get it before you need it. Got (3) for mine and they match up fine, hopefully I won't need them but cheap insurance.

Haha another poster to ignore.