Search results

Spacers arrived. Installed and working great. Due to the smaller chainring the derailleur is now 3/4" farther back. Next will be to shorten the chain by 1 link to bring it back to stock tension.

I installed the 48 tooth chainring today and while assembling I figured out I need to change the spacer. The stock spacer is 5mm and the thicker chainring needs a thinner spacer. I ordered 3.5mm spacers which will fix the issue. I have not changed the chain or removed any links. I checked the...

Since the two bottle holder locations provided on the Ripcurrent do not allow for a bottle holder with the battery installed. I have been using this style bottle holder mounted to the upright on the rack for a year. One screw holds bottom and a zip tie holds the top. Holder is tight and never...

Consider with the lock an alarm. Nothing stops a thief more than something loud drawing attention. Also add a GPS tracking sticker. Or get a GPS tracker and sticker.

I have noticed the brakes are less touchy. When braking it feels more progressive less on/off and less likely to lockup. My butt tells me shorter braking distance when hard on the brakes now. I did have to readjust the brake lever screws which I did not know I could do. This has allowed me to...

I ordered a PASS QUEST 130BCD Narrow Wide Chainring/Chain Ring (Round, 48T) I ordered a KMC e9 EPT 1/2" x 11/128" (narrow) chain.

I went over a log and bent the chainring last week. :mad: I checked the crank runout and it was good no issues. I ordered a new crank set from Juiced today and will install it unless I can get a lower number tooth chainring installed. I have been struggling on the up hill side of some climbs...

I kinda started to feel like I needed 2 Z99 RB 116 link chains and just make one longer. Is the stock chain 1/2" x 11/128" ?? I looked at the chain closer and found the markings Z and KMC on one side then on the other I found Super Narrow. Update: After research I am going to get the KMC e9...

Called and Juiced is out of stock on the replacement chains. I cannot find the KMC K99 BR (Rust Buster) 128 link chain anywhere online.

I am trying to identify the Ripcurrent S chain part number from KMC. My chain is 128 links. I think I may have to custom make the length. Does any know an Amazon link to a replacement chain?

Once I started trail riding the rear rotors warped. I have seen many other fat tire ebikes use 203mm and 4 piston setup on front and rear. I use alot of rear brake trail riding and warped a set of 180mm. My 2nd Juiced Ripcurrent S bike has the 203mm rotors but still use the stock 2 piston Star...

After trying to get 2 of the Juiced 35mm stems to hold the stock fork and the new 100mm fork I gave up on it. In the end the stem made the bike too dangerous and I could not get it tight enough to prevent the fork from slipping. I have been using a 40mm stem from Hussefelt. No issues with stock...

The second bike (wifes) I am sticking with the Star Union 2 piston calipers. That bike has the 100 mm fork I just installed today. Trying to finish the rebuilds tomorrow.

Both wheels are at the local bike shop getting the cones and bearings replaced and repacked. Juiced was going to take a week to get the parts to me. I had to buy replacement hubs with all the internals for $25 each. Good to have spares for future maintenance. Update: Bike shop called no parts...

I have been working on this brake upgrade for some time. The stock 180mm dual piston brakes are good but I was ready for some better braking power. I was trying to get a set of the Tektro HD-E725 brakes but they have been out of stock for a few months. So I decided to get a the HD-M725 brake...

So I purchased the RockShox Bottomless Tokens and Air Cap Kit 32mm and installed it with 1 token to start. If anyone want to follow in these foot steps.

Seems like the only place to find replacement parts for the front hub is Juiced. Maybe if I can find out if the cone has a specific part number like CN-R083. I have sent Juiced an email with the pics of the parts needed. I hope they respond quickly and have the parts in stock. I had to wait 4...

I have had this bike for 1.5 years. I am new to bike maintenance. I have ordered 1/4 inch ball bearings replacements. The inside of the hub looks good. I have the parts needed on order. For grease I have the Park Tool PPL-1 PolyLube 1000 Bicycle Grease. Should have it back together by the weekend.

I picked up a clicking noise from my front hub. Took it apart and saw the race was damaged. Looks like overheated. Need replacement but wanted to go with sealed bearing set if I could. Anyone know of how to switch from loose bearings to sealed bearings on a 9mm setup?

Sorry my mistake the fork link is below. KRSEC 【US Stock】 26er Fat 4.0 Tires Rebound Adjust MTB Snow/Beach Bike Air Suspension Fork, Straight Crown Lockout Disc Brake Mountain Bikes Forks, 28.6 Travel 120mm Hub Spacing 135mm I ordered a set of RockShox Bottomless Tokens and Air Cap Kit 32mm...