Search results

I don’t see any options to activate the motor the software detects updates but I have not updated

Kindly if anyone knows how to activate I have bionx software and hardware.

So what exactly needs to be done ? Run power from the non Bionx Battery to these two wire on the motor? And how did you supply 5volts? Isn’t the battery out putting 48 volts or 35v? Will it fry the lcd console?

how much did you pay for the eBIke Elby ?

Max speed you can go with D500 with the unlocking tool?

Sold!

how long these motors last before needing a rebuild?

I don't think he is doing 30MPH. I have both batteries installed. I can use either. My bike is different.

Today I did more testing I ran at full throttle for as much as possible and max speed was 30mph. After 4 miles battery voltage was around 58 volts and the motor bearly got warm. Didn’t do anymore testing since I had to do some work. Remember I don’t have to peddle to reach 30mph without any...

How much you charge for rebuilding this? Also how reliable are these motors? And are the bh controllers pure sine wave controllers ?

After all this is done did the motor function fine?

To go 31mph you gonna have to put up or shut up.

The battery is 18volt x 3 Milwaukee 9.0 ah (162wh)? battery.

Yea today I fixed the fire by running the wire as easy motion has it routed. Basically that was the testing phase. Now the wires are connected to the back of the controller and J.B. welded.

I was able to hit 31mph on Easy Motion Eco 2015. I weight in about 145 lbs with battery setup posted below. I ran the system for about 2 miles. Please see pictures for proof and setup. Hope this helps someone. Please be careful 31mph is very dangerous and on the common roads you will be...

Any ideas if we upgrade to a 500watt motor will it go any faster?

What is max speed you have reached with just throttle only on straight roads and peddle with assist? I cant wait to try it out. What motor does your bike have? How long have you been running the setup? Any problems with the increased voltage?

Next question did you get a 48 volt charger? I only have a 36 volt charger. Will I need a 36 Volt charger? Did your bike originally come with a 36V battery? Thanks for your help. :-)

So how was this done? Just added a bigger battery without any additional wiring etc?? I have a Easy Motion Evo Street (2015). I recently got a 48 VDC 10.5Ah 504wh battery. I will be putting on the 2015 Street bike and trying it out. Lets see if the battery drops in and I can get a speed...