Search results

  1. tykoehn1

    Generic MD 1000 and HD 750 ebike model discussion

    The post does goes past the weld. I can't get the seat post out of the broken bike. I talked to leili and they sent the photos to the frame builders. The said it's because the seat post is too high so it's my fault, see photo of the black bike they sent me. As you can see in my photo, I only...
  2. tykoehn1

    Generic MD 1000 and HD 750 ebike model discussion

    Just riding the bike and noticed it when I got back.
  3. tykoehn1

    Generic MD 1000 and HD 750 ebike model discussion

    cracked the seat post...
  4. tykoehn1

    Generic MD 1000 and HD 750 ebike model discussion

    idk havent tried yet lol
  5. tykoehn1

    Generic MD 1000 and HD 750 ebike model discussion

    im running about 50-55 lbs. More than gates recommends, less than Luna cycle recommends.
  6. tykoehn1

    Generic MD 1000 and HD 750 ebike model discussion

    Send Leili a video of it not working. They sent me a new one in less than 5 days
  7. tykoehn1

    Generic MD 1000 and HD 750 ebike model discussion

    Leili sent me a new one, came in 5 days :)
  8. tykoehn1

    Generic MD 1000 and HD 750 ebike model discussion

    https://lunacycle.com/batteries/chargers/
  9. tykoehn1

    Generic MD 1000 and HD 750 ebike model discussion

    What would say your average cadence is in 4th and 5th
  10. tykoehn1

    Generic MD 1000 and HD 750 ebike model discussion

    One of my bikes really likes the movable line to be slightly on the high side of the yellow mark. Haven't experience a single skip. I also run a little higher belt tension on that. I just started to dabble with programming. Ill make a separate thread for that too. Mainly wanted to make the...
  11. tykoehn1

    Generic MD 1000 and HD 750 ebike model discussion

    Interesting note of the cable cover length
  12. tykoehn1

    Generic MD 1000 and HD 750 ebike model discussion

    Pretty! What state is that?
  13. tykoehn1

    Bikonit MD & HD accessories

    I dont have much experience with air forks but I read the more premium ones have only one air stem hence one fork has air and the compression/rebound is on the other fork. apparently its more reliable that way? I am going to set sag at 15% of total travel. So about 18 mm. Ill let you know how...
  14. tykoehn1

    Generic MD 1000 and HD 750 ebike model discussion

    I sent them a video of the gear indicator not moving when i change gears. Honestly I haven't open the package yet. I'll be working on the bike tomorrow so I'll let you know.
  15. tykoehn1

    Bikonit MD & HD accessories

    Hi Terry, can you add a picture of the valve on the underside of the same fork. I thought there was only one valve to attach the shock pump too
  16. tykoehn1

    Generic MD 1000 and HD 750 ebike model discussion

    I asked Leili to send me a new one. It came in last then a week. Haven't installed it yet
  17. tykoehn1

    Generic MD 1000 and HD 750 ebike model discussion

    I use the SKS x-guard to protect the backside downtube battery. The velcro strap that holds the guard on gives me a sense of security lol
  18. tykoehn1

    Generic MD 1000 and HD 750 ebike model discussion

    Mine didn't have a code
  19. tykoehn1

    Generic MD 1000 and HD 750 ebike model discussion

    I adjust the igh with the power off and I from gear two to five and five to two with the back wheel off the ground.
Back