Search results

Thank you for sharing the bypassed program. Now we need the programming dongle and the ability to unlock up to 100A power in the program.

Replace oil each year or 5000 km whichever comes first.

The LinkedIn profile picture matches the person on a picture on the Innotrace Facebook page https://www.facebook.com/photo/?fbid=733881061344152&set=pb.100054368433354.-2207520000.

It is the user responsibility to keep the battery charged above the lower limit and monitored during storage. It has to be charged maybe 50-70% for long storage and if it is below 50% it has to be charged as soon as possible above 50%. It means if you are not planning to use it for more than a...

The guy here states regular UART USB cable should work with Innotrace X1. Anyone else tried it? https://www.emtbforums.com/threads/tqfreaks-dengfu-e55-build-thread.32525/page-3#post-459645

I have a motor with Innotrace X1 controller and I would not call it smooth, especially after Yamaha PW-X. The Innotrace X1 motor I have is quite jerky and laggy. The throttle is extremely sensitive and jerky. I have a feeling Innotrace just sent me a regular Bafang m620 motor with Innotrace logo...

OK, I hope someone will hack it.

Does anyone know the power consumption or max amperage on each out of 10 support levels Innotrace programs by default for 3000W 52V 60A controller? I am about to finish my build and Innotrace does not respond and I need to know this to not overcome my 52V 30A battery power capability and not to...

Innotrace keeps silent. Where is the 24/7 support they advertise?

It does not interferes with the rear triangle, it interferes with the Bafang m620 motor itself even they states it is compatible with it. But it is not. And there is no way to tell if it will not work because of they do not provide exact drawings or anything I can use to figure out if it will...

OK, I found the Bafang m620 manual. It says 45 Nm for the crank arm bolts. https://cscmotorcycles.com/content/docs/CSC-Ebikes_Bafang_G510_Manual.pdf

I purchased Miranda carbon fiber crank arms and they stated the crank arms should be compatible with Bafang m620 and I ended up with the left crank arm interferes with the Bafang m620 motor case after I torqued it to 40Nm. Maybe 40Nm is too much? It needs to have at least 1.5 mm more offset to...

So what is the torque? Is there service manual for Bafang m620 where I can find this torque?

What is the proper specs for Bafang m620 crakarms?

Assembling thread for the first frame https://www.emtbforums.com/threads/tqfreaks-dengfu-e55-build-thread.32525/

I found the code, it is 1657 https://electricbikereview.com/forums/threads/innotrace-x2-display.51506/#post-589139

Albright great news! I found the advanced settings code for Innotrace X2 display. The code for advanced settings on Innotrace X2 display is 1657 Now I can set the wheel diameter (mine is 29 inches) and the speed limit (by default is was set to 15 mph). So you go to the setting and then go to...

I found the display manual. The display name is Intelligent OLED Display DM03 https://cdn.shopify.com/s/files/1/0588/1125/2889/files/varstrom_dm03_display_user_manual_en.pdf?v=1661845940

I tried the code 1919 with my Innotrace X2 display and it does not give me access to advanced settings. Any ideas how to figure this out?