Search results

thx made

In the next post you will meet E.T. That's what I call the bike

Here you can see how it will look on the front

Carbon plates will also be placed on the sides of the aluminum

Then I covered everything with carbon. And I also made aluminum plates that I milled in Carbon. It to look cooler.

I didn't want you to see the battery. So I first made a polyester model

These are aluminum parts that I made with an router.

The controller has been given a place. The rest of the room is equipped with all cables that come together there. and there are many. Because I didn't want you to see any cables, a hole was milled out here

Here you can see that the wood has of course been replaced by 5mm thick aluminum

Disc brake from Hope (180mm). Is so good that I get off the ground with my wheelchair. I.

Thx dude's

This is the part where the part (bike) is linked to the wheelchair. My friend Didier made this. These 2 brackets are located between the 2 lower triple tree clampste . Of course there are roller bearings here.

When we had brainwashed about what we were going to make, the first thing Didier said was that the entire front building had to come as close as possible to the wheelchair. This is to ensure that the weight distribution on the front wheel is as high as possible. I don't have a lot of problems...

THX dude. I certainly want to show to fellow sufferers that much is still possible. Maybe he also has plans in mind to make this. That is why I want to state everything as well as possible that it is easy to follow. And if there are any questions, they can certainly ask them. I think it is a...

OOOOOO yes, I can read and understand English, but I cannot write it. I work with a translation program and hope that everyone can follow that. Once that was done, I could continue with the design of the bike. First I made a wooden support. The battery is in the middle and the controller next...

No no, not at all. It contains parts for a lot of money. I have not counted the hours, but there are very many

Here is a DIY how I make the bike https://electricbikereview.com/forums/threads/diy-homemade-electric-handbike-for-wheelchair-robolop-design.31850/

40 years ago I ended up in a wheelchair. 4 years ago my shoulders broke down. I had surgery on one shoulder, but on the other I need a protesis. But they don't want to do that immediately, because I am still very limited in my arm movements. I was not allowed to ride a hand bike anymore. For my...

Something about myself. I've been in a wheelchair for 40 years, but life goes on. At the age of 20 I was told that a tumor was in my back. Of course I did not feel well for years because of that. But you can do 2 things, sit in a corner, or take life back. I opted for the 2nd. There is indeed...

I would like to post some explanation and photos, so that there might be members who are also in a wheelchair who may learn something from it. You never know. With this I want to reach as many people as possible in a wheelchair. Can someone also advise me where to post the DIY?