Search results

When the bike is together it is almost impossible to peddle geared down with it locked in re-con mod. The full BatteryThrottle or assist will not work as well.

I TOOK THE WHEEL OFF THE BIKE AND BY HOLDING THE AXLE I STILL CAN HARDLY TURN THE WHEEL .SO MAYBE POWER HAS TO BE APPLIED TO RELEASE THE RE-CON .MOD. WHEN THE POWER IS ON A STEADY BEEP COMES FROM THE BATTERY , THE RELEASE MESSAGE IS NOT GETTING. TO THE MOTOR. EVEN THOUGH THE G2 SCREEN SHOWS THE...

Thanks , we have two of these bikes with this system. If I change batteries they both act the same .like I mentioned , this bike has g2 electronics. And if I set to full re-con mod.all three lights go on and if I squeeze the rear brake or apply the brake ,all of lights go out .For me this tells...

Another point is that when I set the g2 to full re-gen .and pull the rear brake all of 3 lights go out on g2 screen .I think that tells me that the re.gen is being released, but the motor stays in re-gen mod.

Thank you for info and input ,I am open for all the help I can get on this . I thought about the brake and disconected the wire but still no difference .As soon as I turn on the g2 a regular beep starts up .First i thought it was from inside the motor but it seems to be from the battery .I also...

Battery assist bionx bike motor is stuck in the charge mide. I use a g2 console .can anyone help me on this .

The 48 volt battery is fully charged and everything else seems ok .I've tried 1st second or full assist even full battery but the motor will not come out of that charge mod.

Hi , I have a battery assist Bionx rear drive with g2 console ..My problem is the motor is locked in the full charge mod. When peddling downhill this mod. Will charge the battery ,but almost imposible to peddle on level ground . Do I have an easy fix ?