Search results

Not without welding experience. There’s two screws near front and two on a clamp near rear. I have to remove the inward facing footrest on both bikes and then there’s no issue fitting in the rack. See picture...

I purchased the SW-3 https://smile.amazon.com/gp/aw/d/B000NOPWX8

THANK YOU! I sent them a message using their website and Rob replied the next morning! Gave him the information that Rad Power Bikes provided me and my plans to purchase 245mm Front Spokes and if I need rear ones I would cut them down and use my Cyclo spoke threader. Rob said that was a good...

I have been searching for these... I have a RadWagon so I figured I would buy the 245mm that would cover the front and cut them down if I need a rear. I already have the tread roller for 12G spokes. I was hoping to find a source that wasn’t shipping from China or Taiwan. You mentioned...

I sent an email to Rad Support and they replied with the following information: ......When tuning up the spokes on your bike, we recommend tensioning to around 100 Kgf. This is standard for straight, 12 gauge (2.6mm thick), stainless steel spokes, which all of our bikes are equipped with from...

Ok... I want to be prepared so I’d like to know the same... is there a link on amazon, what length, how to thread, Aluminul, Steel??? I’m hunting for info and came across this thread.

Well I guess I wait till my 1yr Warranty expires and then I can have some real fun! How about the "Odometer" on eBike displays in general that show the Total Miles traveled with a bike. Is that stored in the Display Unit or on a chip in the Motor Controller? I'm thinking its the display and...

According to there website it says: 750W Brushless Shengyi Direct Drive Hub Motor with 40Nm of Torque https://www.radpowerbikes.com/products/2018-radwagon-electric-cargo-bike?variant=5032655749151

First I have heard about eggRider. Looks interesting. Is it comparable with the 2018 RadWagon Controller or do I have to replace it?

AHicks - very well said... I'm a new owner of a RadWagon with a DD Motor and knew what I was getting into. The RadWagon as well as the RadCity are sold primarily as city or commute bikes and the Regen capability of their motors fall into this type of use. Yes, one could argue that the Regen...

Update.... I have the same rack and it seems that Rad has never actually tried to place two Radwagons on this rack. As Hollywood said, we have to remove the inward facing rear footrests for two Radwagon to fit. Actually if even one Radwagon and any other bike is to fit as the rear footrest...

So it has been confirmed by eTrailer that I indeed purchased the HR1450Y-E shown on the Hollywood site and the video on Rad’s page. So now I will reply to the support person with a simple question asking if there’s is the same one?

Even if I seperate them far left and right the lower cargo platform is so wide it would still hit the front axel of the other bike. I have a request into Hollywood about this... I put the link to Rad’s Hollywood Rack in the Request. It’s just a bit frustrating that the Rad support person...

Received another non commital answer from Rad to a point blank question.... I asked if Hollywood made a special model of the rack for Rad alone and all I was sent was the link to the RAD web page that shows the Hollywood Rack. Problem is, it does not show show the actual Model Number...

Wow... I asked Rad Power Bikes for help and since I did not purchase it from them they refused to help. Told me to contact Hollywood Racks... Now that’s NOT customer service. I have sent a message to Hollywood since Rad was no help. Did I get the same one Rad sells or does Hollywood make...

I was told this was the one to get for the https://www.etrailer.com/Hitch_Bike_Racks/Hollywood_Racks/HR1450E.html I have two Radwagons and two of them DO NOT fit??? The lower cargo platforms rub against the other bikes front axel! The outer bike cannot even stand upright so I cannot bring...

I just received the Hollywood Racks Sport Rider SE2 2-Electric Bike Platform Rack - 2" Hitches from etrailer https://www.etrailer.com/Hitch_Bike_Racks/Hollywood_Racks/HR1450E.html It does NOT fit two Radwagons??? I had to remove one of the cargo kick boards off each bike or they rubbed on the...

He has a 2018.... I’m betting he feels it because he’s going “up” a slight grade/hill when it happens. I’m sure we would all feel it if we were pedaling and actually assisting the motor and suddenly our best friend (the motor) stops helping us. I’ll have to spend more time with him talking...

I guess I’m not making myself clear... I agree... I stated that since I did NOT have the break lever pulled it was simply the resistance of the motors magnets due to the direct drive nature of the motor as harryS stated. That’s exactly what I am trying to say... I have had it upside down and...

That sounds interesting / exciting! Guess I'll have to wait for my "Limited 1-Year Warranty" before trying this or I'm sure they would consider this a warranty voiding factor since you have to pull the motor cover off and your injecting a substance into the motor.