Yodaman1's latest activity
-
Yodaman1 replied to the thread Rear sprocket and hub issue.Could be the reason but not sure. -
Yodaman1 replied to the thread Rear sprocket and hub issue.I'll replace the pawls however, are they universal for a sram 9sprocket cassette? Newbie here so be gentle.😀
-
1st...put the beer down when you're shooting video 🤣 That chip on the ratchet teeth looks minimal to me and replacing the hub is much...
-
The Pawls do look to be damaged as though they weren't fully seated in the notches of hub?? I'm not sure what that washer was supposed...
-
Very interesting...... Pawls still look chipped and if you can find replacements I would do it as there probably inexpensive and easy...
-
Yodaman1 replied to the thread Rear sprocket and hub issue.Here's a better video.
-
Yodaman1 replied to the thread Rear sprocket and hub issue.Please see my next addition to solving my bikes problem.
-
Yodaman1 replied to the thread Rear sprocket and hub issue.Hello Family, I took the rear hub apart and posted a video. Please let me know what needs replacing or upgraded. Thanks again for all...
-
Park Tool has a instructional on freehub servicing https://www.parktool.com/en-us/blog/repair-help/freehub-service I disassembled...
-
I forgot this is not hwere you need to spend much on better quality tools. the only differewnce between the park chain tool and a cheap...
-
It is for a freewheel. The freewheel keeps tightening up as you pedal and/or the mid-drive motor pulls on it. It can easily go over...
-
If the photo is your wheel than you have a cassette on freewheel type hub not the all in one freewheel (pignon) so if you remove the...
-
Yodaman1 replied to the thread Rear sprocket and hub issue.Thanks for the video. I went ahead and started a bike tool set now lol
-
If you have a local bike shop willing to work on your ebike, I think that should be your next move. It's just a mechanical problem that...
-
Yodaman1 replied to the thread Rear sprocket and hub issue.I just removed the wheel but don't have the special tools needed to disassemble the hub/cassette.
