Yodaman1's latest activity
-
'f_ń Sram Glad you're upgrading and moving forward. I wonder if these universal kits are worth exploring... -
Yodaman1 replied to the thread Rear sprocket and hub issue.I had to get a new drum as the pawls aren't sold individually. Plus, I ordered an upgrade. DT Swiss HG Ratchet LN Upgrade Frhub Kit...
-
Grey metal, not steel. Pawls should wear round, not fracture. 99.999% of cheap parts are the former. Dealers will not allow you to know...
-
Yodaman1 replied to the thread Rear sprocket and hub issue.Yes Yes sir.
-
It looks like your pawls are only meshing with hub notches by just over half way. There's something wrong there.
-
For sure, but I'm almost positive that the pawls aren't fully meshing with the notches in the hub. That's why all three pawls still have...
-
Yodaman1 replied to the thread Rear sprocket and hub issue.Yes very solid. Here are the pawls. As several people commented, it's better to replace them. Going to a bike shop tomorrow. Fingers...
-
-
And bring the sprockets/ratchet part with you for reference.
-
go to a good bike shop they may have them on hand.
-
If you can track down the exact hub/cassette part numbers and paperwork you should be able to see what parts can be ordered and in what...
-
Thinking about this some more. You probably can't delete that washer because it's probably a shim washer to make sure everything is...
-
I'm no bike mechanic either. I just like taking things apart to see what makes them tick. And a freehub actually does tick, so it's...
-
Yodaman1 replied to the thread Rear sprocket and hub issue.Yes, its very solid. When I spin the sprocket in reverse, should there be a slight metal on metal sound?
-
All three pawls were broken in the same way with a piece of each pawl still intact. I'm thinking that the unbroken parts of the pawls...
-
That's where we're the same... No eye dear? 🙃 I'd start with contacting Sram and/or a local bike shop. There's a few bike mechanics in...
