Recent content by xsp6000

  1. xsp6000

    Specialized Turbo Levo gen 2-3 Batterij

    Specialized Levo gen 2-3 battery, is the voltage always present at the connection or how can you wake it up without connecting a motor and TCU?
  2. xsp6000

    New Enviolo hub firmware / Vado 5.0IGH

    This is the explanation of the newer support R48 The manual calibration process is now fully automatic and has been moved to the background. It is no longer necessary to calibrate the AUTOMATiQ. Improved switching algorithm reduced unwanted behavior that could sometimes lead to busy behavior...
  3. xsp6000

    New Enviolo hub firmware / Vado 5.0IGH

    I have the update R48, but every time I start an automatic calibration happens. I don't feel or notice any other improvements. I don't even like this and I had contacted Enviolo support and could only have it sent to the bicycle dealer via the bicycle dealer. old moves. In the meantime, this has...
  4. xsp6000

    Specialized Turbo - No Security Features Working and now No App Connection.....fixed.

    This is incorrect, I have had a Turbo Levo since June 2017 and recently had it updated to be able to use it in the new app (before the update I could not connect the bike via the new app), after the update I can use it via the new Set up the app only the support other things are not visible...
  5. xsp6000

    Turbo Vado 5.0: IGH or chain?

    Como 5.0 IGH My como 5.0 IGH and my wife's work perfectly, but sometimes the clock is at 10 am without us having changed anything. If we then connect via the app, it will show the correct time again for an indefinite period of time?
  6. xsp6000

    Specialized app almost never connects to bike (Turbo Vado 5.0 IGH)

    I had this issue earlier in the week. Like others, I had to to clear cache / storage and even uninstalled a couple times to get it to work again, and it was a challenge to get prompt to connect as a companion device. I did have some instances where app claimed it connected during setup, but...
  7. xsp6000

    Specialized app almost never connects to bike (Turbo Vado 5.0 IGH)

    They are currently aware of the problems with the (new app) and are looking for beta testers. Anyone who feels called to do so can register. I also applied, but there are so many conditions attached that I will not participate. Ultimately you are working for Specialized for free and if things no...
  8. xsp6000

    Turbo Levo 2017-2018

    Unfortunately my Turbo Levo motor is defective (the electronics) it is as if 1 phase is not controlled! Now my question, can't I replace this with just the Brose motor? Has anyone already done this and what are the experiences (model 2017-2018) Thanks in advance
  9. xsp6000

    New Enviolo hub firmware / Vado 5.0IGH

    It happens every time after the bike has been started! I reported it to Enviolo's support department and received the answer that the bicycle dealer can restore the older R47 version, but I did not receive any explanation or possible solution. I still have the same bike from my wife, but I am...
  10. xsp6000

    New Enviolo hub firmware / Vado 5.0IGH

    I have set the slider via the app and when I leave it is perfect, but it happens every time I cycle a few meters. This was not the case with the R47 software, it is new since the update to R48. I just sent an email to Eviolo support with the question, I'm still waiting for an answer
  11. xsp6000

    New Enviolo hub firmware / Vado 5.0IGH

    It's been more than 2 weeks now and every time I leave it happens again, I think I have cycled more than 250 km since the update. I'm going to ask Enviolo anyway
  12. xsp6000

    New Enviolo hub firmware / Vado 5.0IGH

    I updated from R47 to R48 for the Enviolo Automatiq and I feel like I should have not done this. Now when I leave and drive a few meters I hear the Enviolo's motor and I have to pedal much faster a few times before I get back to the set cadence. I didn't have this before this update and I find...
  13. xsp6000

    Como 5.0 IGH & Vado 5.0 IGH

    Hi, A lower cadence is available from software version MM TCD Display firmware 29.E.0. (2023/08/02) replaces 20.E.0 Required for Enviolo Automatic IGH bikes Features: An improved cadence mapping for automatic IGH cycling Unfortunately, the image in the manual is still with the older software...
  14. xsp6000

    Como 5.0 IGH & Vado 5.0 IGH

    In some ways it is understandable that you can choose from a certain value as now and by the way, at Bosch there is also a min. mode when we tested, even at the beginning of this year, it was not even possible to set it with the smart Kiox system. Now Specialized finally listened and changed...
  15. xsp6000

    Como 5.0 IGH & Vado 5.0 IGH

    Perhaps the update has only been distributed for Belgium or the Dutch, these are the data: Bike: Vado MY20-22 / COMO MY20-22 / TERO MY22 MM TCD Display Firmware 29.E.0 Release date: 02/08/2023 Replaces: 20.E.0 Status: Required for Enviolo Automatic IGH bikes/ Optional non-Enviolo Automatic IGH...
Back