stompandgo's latest activity
-
stompandgo replied to the thread What have you learned from your e-bike experiences?.I have the same blue GA3 grips on my grey Cannondale. The small size fit well. Screw the fashionistas. Ride on. -
stompandgo replied to the thread How to change turbo mode to be as smooth as ECO.The Bosch dynamic modes don't really change the response of the drive unit, although it may feel like it. With Tour+, for example...
-
stompandgo reacted to Jeremy McCreary's post in the thread How to change turbo mode to be as smooth as ECO with
Like.
No, because it's another mid-drive. If you do nothing to bring up your cadence, you'll end up with another hobbled motor. Even if the... -
stompandgo replied to the thread How to change turbo mode to be as smooth as ECO.The ultimate low cadence e-bike is a Class 1 throttle bike. They work well at zero cadence.
-
stompandgo replied to the thread How to change turbo mode to be as smooth as ECO.Sort of. It means that assist doesn't get significant until the rider reaches a certain cadence. 40rpm is too low for high assist on...
-
stompandgo replied to the thread Fitting Orbea rear derailleur cable.You won't need the Park kit to replace the inner wire as long as it's not torn up inside. Use a proper cable cutter to cut the...
-
stompandgo replied to the thread How to change turbo mode to be as smooth as ECO.The Bosch Performance Line Sprint, like it's BES2 predecessor the Performance Line Speed, are biased towards cadence.
-
stompandgo replied to the thread Can't get crank arms on after removal.Lubricating a taper shaft throws off the torque reading. The steel spindle will damage the aluminum crankarms if overtorqued. The...
-
stompandgo replied to the thread How to change turbo mode to be as smooth as ECO.With any of the lower torque Bosch smart system drive units, Sport provides well over 200% assistance. That's a lot. I think the issue...
-
stompandgo replied to the thread Can't get crank arms on after removal.Those look like square taper cranks. Those have four flat sides. Is that what you have? If so, never lubricate square taper crank mating...
-
stompandgo reacted to dodgeman's post in the thread 2025 - Our Rides in Words, Photos, Maps and Videos with Like.
I rode 13 miles this morning. I forgot to take any pictures. It’s been a while, we just got back from several days in Switzerland and...
-
stompandgo replied to the thread Fitting Orbea rear derailleur cable.Park IR1.3 internal routing kit
-
stompandgo replied to the thread 2025 Vuelta a Espana.No problemo.
-
stompandgo replied to the thread 2025 Vuelta a Espana.You are confusing stage time differences with GC time differences. On GC, Jay Vine was 1:17 and change back of Vingegaard at the start...
-
stompandgo replied to the thread 2025 Vuelta a Espana.Visma wants Q35, Bora, and Decathlon to do the work. They are at higher risk of losing GC spots than Visma or UAE. Visma won't let Vine...