spokewrench's latest activity
-
Sspokewrench reacted to Gionnirocket's post in the thread splicing Julet 4 pin tail light cable with
Like.
I would silicone on things like canvas which worked well... but that's also what I had on hand. I try not to buy to many specific... -
Sspokewrench replied to the thread splicing Julet 4 pin tail light cable.Failed. I came to see that the slack is necessary to slide the controller out of its cubbyhole. It cost me half an inch to splice the...
-
SGot it, spoke... Glad you have the slack you need to do the splicing. Tallyho.
-
Sspokewrench reacted to Gionnirocket's post in the thread splicing Julet 4 pin tail light cable with Like.
The larger the shrink ratio the more versatile it is.. Especially when working with, or need to feed it over something like a connector...
-
Sspokewrench replied to the thread My "New" Ebike.That's a dad-gummed porcupine. He looks harmless after a veterinarian removed his quills, but salt is porcupine catnip, and a porcupine...
-
Sspokewrench replied to the thread splicing Julet 4 pin tail light cable.Thank you! If I'd known then what I know now... This stuff should be great with uninsulated crimp terminals, which make it easier to be...
-
Sspokewrench reacted to Gionnirocket's post in the thread splicing Julet 4 pin tail light cable with Like.
I've done that as well.... Sometimes even putting heat shrink over it Typically the heat shrink with adhesive has a thicker wall and...
-
Sspokewrench replied to the thread splicing Julet 4 pin tail light cable.Those are where the corners of the base of the center stand mashed it. As you can see, I was able to pull a lot of slack out of the...
-
-
S@spokewrench forgive me but I’m having trouble envisioning where that cable is on the bike. It’s so close-up that I don’t know what I’m...
-
Sspokewrench reacted to Marcela's post in the thread Stuck at the end -L or Start -XL of bike size. with Like.
I'm in the same boat. Height, shoes, waist, you name it, always right in the middle. I was thinking the other day, if I get another...
-
Sspokewrench replied to the thread Stuck at the end -L or Start -XL of bike size..I hear you. I've had to modify seat and handlebar positions of 3 e-bikes that were supposed to fit me. After the first one, I learned to...
-
Sspokewrench reacted to Bikeman's post in the thread Stuck at the end -L or Start -XL of bike size. with Like.
I would like to get a Trek FX1s. The sizes are Large 5'9" to 6'1" and XL 6'1" to 6'6". I am right in the middle at 6'1". I can get the...
-
Sspokewrench replied to the thread splicing Julet 4 pin tail light cable.Thanks. That looks like the stuff used to bundle cables coming from handlebars, and it can be applied after the repair. I'm better off...
-
Sspokewrench reacted to 6zfshdb's post in the thread splicing Julet 4 pin tail light cable with Like.
I've used small bore spiral wrap in situations like that. It's available in sizes down to .25". It isn't perfect for preventing tugging...
-
SI removed the center stand from my Abound. It's wonderfully made. I thought pulling the hinge pin would be asking for trouble, so I...
-
