Recent content by -sandro-

Do you need to open the case to install them?

I have the 13Ah version (624Wh) and it could be different. https://www.leoncycle.com.au/dehawk-i5-battery-48v-for-ncm-moscow-milano-venice This is where I read 3A.

What battery version?

Anyone with stock battery can you confirm it can accept 3A charging as maximum input?

Hi, which version and width?

The bike came with Schwalbe Smart Sam, however I'm now doing pretty much only urban commuting and a little bit of gravel (still in urban settings so very stable conditions). What do you suggest is the best replacement to reduce friction? If possible I would like to find something that could work...

Ok let us know if that fixes the issue.

Not sure it could be just a cable problem?

Wait, things are starting to get "messy". Not sure if all being on the opposite side changes anything. I would like to see someone that opened this motor already. Probably someone has a video or pictures already?

From that video doesn't look like you need to remove the freewheel, the freewheel is attached to the other cover and then the motor core is just attached by compression. So basically I could just replace the entire set all together with no special tools. I see all this from 10:20 in the video.

Ok so I'll try to open it, I read some people just needed some grease on the gears to fix the noise.

Another question, NCM said they could ship this without the case and this requires to remove spokes as well. However according to the video it doesn't look like you need to, am I right?

Hi, seems pretty easy to do probably much easier than respoking, at least for the planetary gears. They also sell the wheel entirely even though that is just a waste of materials.

I own the NCM Moscow standard edition since 2019 with 10000km on it today. A few days ago after a MTB ride at low speeds on a very steep trail it started to become more noisy, especially at high currents/low speeds (below 10km/h), it doesn't start that noisy at the begging but once you ride it a...

I replaced the pas sensor and it worked.