rochrunner's latest activity
-
rochrunner reacted to Jeremy McCreary's post in the thread Vado SL 4.0 12-Speed Conversion with
Like.
Just turned 78, and believe me, you're not alone in this. To date, the errors have generally been annoying and sometimes time-consuming... -
rochrunner replied to the thread SRAM NX 11-spd derailleur on SL 4.0.The problem -- found by my local shop -- was that the stainless steel pins pressed onto the HG freehub were out of position, resulting...
-
rochrunner replied to the thread Vado SL 4.0 12-Speed Conversion.The bike shop found the problem and it was something that I didn't know about. The HG freehub on the Onyx hubs have stainless steel...
-
I have been very happy with the Panaracer Gravel King X1 Plus tires on my Pinarello. The 40mm version on my 25mm GRX rims measure 42mm...
-
Now that I've decided against going tubeless, I'm ready to ditch my Pathfinder Pros because they are too prone to punctures when run...
-
rochrunner replied to the thread Vado SL 4.0 12-Speed Conversion.Yes, I can get it over here. Wolf Tooth no longer appears to make one that's compatible (104BCD only with a lot fewer teeth).
-
rochrunner replied to the thread Vado SL 4.0 12-Speed Conversion.Thanks, @Stefan Mikes . I did not have any luck when searching for a 104BCD/44t gear and had never heard of Garbaruk. But I also have a...
-
rochrunner replied to the thread SRAM NX 11-spd derailleur on SL 4.0.Thanks. What does it attach to?
-
rochrunner replied to the thread SRAM NX 11-spd derailleur on SL 4.0.Do you have a link for that?
-
rochrunner replied to the thread SRAM NX 11-spd derailleur on SL 4.0.I don't know what a "high low chainring" is (same as a narrow-wide maybe, which the bike already has?). I'll look into the...
-
rochrunner replied to the thread SRAM NX 11-spd derailleur on SL 4.0.Thanks. I found it a couple hours ago when I had the bike on my work stand. A lot easier in good light and quiet surroundings compared...
-
Does the 11-speed NX derailleur that came on a 2024 Vado SL have a lever or button or whatever that locks it into the extended position...