PedalUma's latest activity
-
PedalUma replied to the thread From Class 2 to Class 1. How "hard" is it to switch?.This one just came in. It is a Bionx Yuba Mundo that is in perfect condition. The Bionx hub-drive system died and is not supported... -
-
PedalUma reacted to McApple's post in the thread From Class 2 to Class 1. How "hard" is it to switch? with
Haha.
Just start off heading towards Pakenham, when you start feeling tired turn around and head back down grade. -
PedalUma replied to the thread From Class 2 to Class 1. How "hard" is it to switch?.There are two kinds of 'lag' and 'over-run'. The first is time. It is set in 100 millisecond increments. Visual perception takes 100...
-
PedalUma reacted to BlackHand's post in the thread From Class 2 to Class 1. How "hard" is it to switch? with Like.
I'll say the delay/slack is noticably less in my gen4 PL Speed than on the gen2. You can trigger assist while stopped at a red light...
-
PedalUma reacted to BlackHand's post in the thread From Class 2 to Class 1. How "hard" is it to switch? with Love.
Yes, the new Bosch drive units have added hill start and hill hold functions in addition to improved walk assistance...
-
PedalUma reacted to speedub.nate's post in the thread From Class 2 to Class 1. How "hard" is it to switch? with Like.
I'll add this: my wife recently began riding a bike with a Bosch Performance Line CX and a few times now the bike has lurched away from...
-
PedalUma reacted to Stefan Mikes's post in the thread From Class 2 to Class 1. How "hard" is it to switch? with Like.
It is unnoticeable. Some mid-drive motors also allow setting the Zero Cadence. Fancy this scenario: You are stuck on a big rock on your...
-
Stomp is a cycling sports expert here. I mentioned Cyclocross as the Poland's Cyclocross Championship was held the weekend before, in...
-
PedalUma replied to the thread From Class 2 to Class 1. How "hard" is it to switch?.Bosch motors do have a small amount of delay. Otherwise a bike would jump into traffic while waiting at an intersection with a minor...
-
PedalUma replied to the thread From Class 2 to Class 1. How "hard" is it to switch?.@6zfshdb, I like the kick-in at about 15 degrees. On some cadence bikes they won't kick in until 180 degrees. It sucks. That is why many...
-
PedalUma reacted to BlackHand's post in the thread From Class 2 to Class 1. How "hard" is it to switch? with Haha.
So that's easier than fixing the date stamp on your camera, huh? :)
-
PedalUma replied to the thread Show Us a Tool.This just in. A 12-50 for a gravel bike. @Stefan Mikes has likely never seen an all steel setup like this. It will climb a wall. It is...
-
-
PedalUma replied to the thread From Class 2 to Class 1. How "hard" is it to switch?.You go to the main menu, then to advanced/engineering. Scrolling down to Torque Sensor, and adjust the milliamps input. This will be a...
-
PedalUma replied to the thread From Class 2 to Class 1. How "hard" is it to switch?.Torque sensor bikes kinda work like a Tesla. You push with pedal with pressure to go instead of thumb pressure. On good ones that...
-
PedalUma reacted to Extreme1's post in the thread From Class 2 to Class 1. How "hard" is it to switch? with Like.
How about going to your LBS and trying a pedal assist bike? Try riding it in Turbo mode, I think you’ll find that very easy to pedal...
