Nvreloader's latest activity

Eco 1 99% of the time, unless I am in the rough stuff..

I spent more time outside from sun up till well after the street light came on, Grampa's old springer dog "Buzz" and I put hundreds of...

Mom used to make, for all the neighborhood kids, a mustard and lettuce sammich, a thick coating of mustard and several leaves of...

Just thought I would check and see if there was any other air gun shooters around here> I shoot both C02 and HPA in the 4 different...

PC I measured all 3 of my bikes and the Outside diameter of the rubber stem at the rim was .300", the closest MM measurement I can find...

IIRR, Mom gave me 5 chop sticks and I used them to make 5 piece throwable boomerangs that would explode when they hit anything, us...

Thanks Mr. Coffee I have the Bakcou tubes in my FT bikes, and they are Schrader valves, but are NOT threaded the length of the stem... I...

Hey Guys Do they make Schrader threaded valve stem FAT bike tubes, 26 x 3-4"? I hate fighting getting the locking pump head onto the...

I made my own extended fenders, I was riding a section of I-80 and found a section of the brush/whiskered type of ice/rain deflectors...

I have over 2500+ miles on my 2021 Can 620 motor, Wart Hog untouched, it has been problem free, but is starting to growl at me, need a...

Think about adding a front hitch rack for the bikes... ymmv

Thanks guys, Ped & guys Is that 9mm/.355" going to be enough offset, very nervous about this offset etc, I don't quite understand it all...

Hey Guys Need some help here, I am getting the DM02, 500w electric motor to go on the Montague folding bike, (wife won't ride it, so...

IMHO, The first thing I would do, when owning a new bike, regardless of the Brand name, is put FLAT OUT in the tubes/tires. This should...

That's really good. I believe you are on a BBS02B? You must be riding with minimal assist. My BBS02B burns 8 watt-hour/mile (years of...