MrCaspan's latest activity

  • MrCaspan
    MrCaspan reacted to Gionnirocket's post in the thread Part for Battery with Like Like.
    It's typically over time and progressively gets worse until failure.
  • MrCaspan
    MrCaspan replied to the thread Part for Battery.
    And I have no clue if this happened over time or if it all happened at once. I am assuming it was over time. It is a 1000w mid drive so...
  • MrCaspan
    MrCaspan replied to the thread Part for Battery.
    No clue, I am guessing there was junk in the port that caused a small disconnect. I didn't take my battery off all summer so it's...
  • MrCaspan
    MrCaspan replied to the thread Part for Battery.
    Okay I took my measurements at the bottom of the pins as the top of the pins have some movement This is the male part that is on my...
    • PXL_20250520_185237424.jpg
    • PXL_20250520_185252154.jpg
    • PXL_20250520_185305818.MP.jpg
  • MrCaspan
    MrCaspan replied to the thread Part for Battery.
    100% I have a digital caliper and I'll return with details once I get it!
  • MrCaspan
    MrCaspan replied to the thread Part for Battery.
    You can have a battery not fully insert and stay on the bike? All of my batteries are designed so they require to be all the way in to...
  • MrCaspan
    MrCaspan reacted to Gionnirocket's post in the thread Part for Battery with Like Like.
    Another good tool for this is a Scotch Brite pad. Easier to use on the male side than female. And still clean with alcohol afterwards.
  • MrCaspan
    MrCaspan replied to the thread Part for Battery.
    A wire toothbrush just to knock off all that carbon I feel would work well, but a fine file should not hurt.. But yes, if you have to...
  • MrCaspan
    MrCaspan replied to the thread Part for Battery.
    This is actually really great feedback because every time you transport your e-bike you're supposed to take the battery off and then you...
  • MrCaspan
    MrCaspan replied to the thread Part for Battery.
    Took the caliper and this is a perfect fit for my battery. I have the Juggernaut FS 2 so for anyone else looking this is an exact match...
  • MrCaspan
    MrCaspan reacted to Nvreloader's post in the thread Part for Battery with Like Like.
    Caspan I have a battery extender on the Juggs 4 bike which takes the 1.125" measurement for the 5 pin plug, and the in frame OEM battery...
  • MrCaspan
    MrCaspan replied to the thread Part for Battery.
    Yeah was going to check tonight with my calipers to make sure. It's a perfect fit for that block so it will need to be right on! Yes...
  • MrCaspan
    MrCaspan replied to the thread Part for Battery.
    Forgot about that crap.. well we will see! still cheaper than I $700 USD battery!
  • MrCaspan
    MrCaspan replied to the thread Part for Battery.
    My local bike shop came through and found me this...
  • MrCaspan
    Hey Guys, brought my Fat bike battery out of storage and plugged it into the bike and got nothing. I looked at the battery end and saw...
    • 1747232969228.png
    • 1747232988299.png
    • 1747233008128.png
    • 1747233126595.png
Back