Marcela's latest activity
-
MMarcela replied to the thread Is it possble to covert 26x4 to 3 onch tire and rim combo.I have the park tool tension gauge similar to above, didn't have any luck with it. I have found truing motorcycle rims, remove the...
-
MMarcela replied to the thread Is it possble to covert 26x4 to 3 onch tire and rim combo.It's either that or the DT Swiss U663 with the 30 mm rim width and the Schwalbe Pick Up in 2.3 which is shows out of stock at the moment...
-
MMarcela replied to the thread Is it possble to covert 26x4 to 3 onch tire and rim combo.Interesting, I missed that. Good point to know. How does that convert to in lbs. I tried a convertor and 110 kgf converts to...
-
MMarcela replied to the thread Is it possble to covert 26x4 to 3 onch tire and rim combo.Velocity dually 650B with the 39mm id rim $170 Schwalbe pick up 27.5 x 2.6 $60 The dually also comes in the 26 and 29 same 39mm id...
-
MMarcela replied to the thread Is it possble to covert 26x4 to 3 onch tire and rim combo.Comparing the 27.5 x 2.3 to the 29 x 4, the height difference didn't look to be more than a little over an inch, and figure to lose 3/4"...
-
-
MMarcela replied to the thread Is it possble to covert 26x4 to 3 onch tire and rim combo.I don't see any 29 tires that are appealing for a heavy ebike that will carry a little cargo, probably another 30# at the most...
-
MMarcela replied to the thread Is it possble to covert 26x4 to 3 onch tire and rim combo.The Como wheel has a nice profile so I took it apart. The rim id width is 30mm, the tire is 2.3. Don’t think I would want to go much...
-
MMarcela replied to the thread Do you file depth gauges on safety chain?.Belt sander still heats the edge of the blade. I have a bench grinder and angle grinder so no advantage to the belt. I will never wear...
-
MMarcela replied to the thread Is it possble to covert 26x4 to 3 onch tire and rim combo.I had asked Grin about a replacement 26" rim and they sent a good recommendation. I just sent them another asking about a 29 as I don't...
-
MMarcela reacted to PCeBiker's post in the thread Is it possble to covert 26x4 to 3 onch tire and rim combo with
Like.
Yeah, there's lots of motor kits, but the problem is that if it's got a Fat motor, then it's got a Fat rim as well. A fat rim has the... -
MMarcela replied to the thread Is it possble to covert 26x4 to 3 onch tire and rim combo.Useful spoke info https://ebikes.ca/resources/getting-advanced/wheel-build.html
-
MMarcela replied to the thread Do you file depth gauges on safety chain?.I use an Oregon bench grinder. Have to make sure it is centered when cutting the knives or they cut crooked. Cut the gauges however...
-
MMarcela replied to the thread Is it possble to covert 26x4 to 3 onch tire and rim combo.Thing would be to find someone who already has the package together. This is close but not quite there. Mine uses the Hentach motors...
-
MMarcela replied to the thread Is it possble to covert 26x4 to 3 onch tire and rim combo.I am 180#. The 26 x 4 tires on there are rated for 198#. I scaled it and most of my weight goes on the rear tire. Probably depends...
-
MMarcela replied to the thread Is it possble to covert 26x4 to 3 onch tire and rim combo.When I was checking diameters, didn't seem like the 27.5 was much more than the 26, if I was going to do it, to make it worth my while...
